CM127 Pistol Replica
CM127 by Cyma is an alternative replica for gas models. The replica was made mainly from polymer so the entire skeleton and the slide as well as the trigger were made from polymer. At the back of the slide is a winged fire mode selector plate. The safety was placed on the right side of the skeleton. The replica can fire in semi-auto and full-auto modes, which makes it an incredibly efficient sidearm and, in some cases - like CQB scenarios, even a primary weapon.
The replica is powered by a battery located under the dummy slide. In order to remove the slide it is necessary to slide one lock and the entire operation of installation/exchange of the battery lasts mere seconds. An electric motor allows to use the replica - in comparison to gas replicas - in practically all weather conditions, all-year round. In order to gain access to the Hop-Up adjustment knob it is necessary to remove the slide.
The set includes a magazine that was made from metal, with a capacity of up to 29 BBs. The replica is compatible with standard AEP magazines by Cyma: http://gunfire.pl/product-pol-1152189574-Magazynek-29-kulek-do-replik-pistoletow-elektrycznych-Cyma.html
The set includes:
- magazine speedloader
- charger for the battery
- cleaning rod
Replika pistoletu CM127
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
plastic + metal
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Battery Voltage [V]:|