Delta Spec Ops Assault Rifle Replica
A Spec Ops assault rifle replica made in cooperation with a known and appreciated Amoeba brand. Thanks to the joining of these two giants of the airsoft market, a model that is truly ergonomic and efficient on the battlefield could have been created.
The receiver of the replica was made from a reinforced nylon. The quality of materials used makes it difficult to notice straight away that it is in fact polymer not metal. The receiver bears markings of both Nuprol and Amoeba. Metal was used in the manufacture of the hand guard, external barrel, silencer, stock slide and several miscellaneous elements. The pistol grip is adequately profiled and covered with a rough, anti-slip texture that increases comfort and steadiness of the grip. Magazine release button was enlarged in order to make its usage easier.
The replica features a telescopic, adjustable stock, which allows to adapt the length to the user’s body shape and preferences. The battery can be stored inside the stock and its slide. Access to the Hop-Up regulation knob is gained in a traditional way in this type of construction - by pulling back the charging handle and uncovering the shell ejection port.
AM-009 has a modular hand guard that allows for full adaptation of the replica to the individual needs of the user. RIS 22 mm rail segments can be attached to the hand guard in multiple positions thanks to the holes around it. RIS mounting rail located on the top of the receiver allow for the attachment of a wide variety of additional accessories, starting with optical sights and ending up with flashlights and forward grips. The assault rifle has fixed iron sights: flip-up front and rear sights, attachable to a RIS rail.
The replica has the option to rapidly replace the spring without having to disassemble the gearbox frame. The heart of this replica is a reinforced, slightly modified gearbox v.2, with an integrated EFCS - Electronic Firing Control System module. It controls the operation of the trigger mechanism, allowing for smooth operation and, above all, shortens the motor reaction time to a squeeze of the trigger. A standard connector cube was replaced with an electronic system. EFCS has an in-built MOSFET module.
EFCS significantly prolongs the lifetime of the mechanism, thus of the entire replica and allows to use a high-voltage battery, including LiPo. After purchasing an external, dedicated EFCS programmer, the user will gain the ability to set the sequence of fire modes, as well as the burst mode (3-BB fire).
The replica comes with a steel Hi-Cap magazine with a capacity of up to 300 BBs.
The set does not include a battery or a charger.
The set includes:
- replica
- magazine
- manual
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
Product length [cm] | 77.50 |
Product weight [g] | 2355 |
Power supply | Electric |
Material | Metal Plastic |
Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 300 |
Fire mode | Full-auto Semi-auto |
Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
Inner barrel length [mm]. | 350 |