Duty One pistol replica
The replica is made of plastic and metal. The slide, the trigger and the hammer are made of metal. The replica is powered with CO2 gas. The CO2 cartridge chamber is located in the pistol grip which is opened by taking off the rear part of the pistol grip. The muzzle velocity reaches about 360 FPS. After shooting a few rounds the muzzle velocity stabilizes at about 340 FPS.
The shot can be also placed after cocking the hammer. This results in the easier operation of the trigger. The magazine holds 15 BB pellets and is equipped with a spring lock. Thanks to this the magazine can be loaded without the need of using a quick-loader. There is a 22mm RIS rail located under the barrel which allows the mount of additional accessories such as a flashlight.
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
Product length [cm] | 18.60 |
Product weight [g] | 815 |
Power supply | Gas CO2 |
Material | Metal Plastic |
Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 340 |
Fire mode | Semi-auto |
Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
Length minimal [mm] | 186 |
Magazine capacity [pcs.] | 15 |