GF60 machine gun replica

  • Made of: metal + plastics
  • Lenght: 1111mm
  • Weight: 7300g
  • Colour: black
  • Muzzle velocity: ~440 FPS
  • Powered by: a battery
  • Manufacturer: GFC Guns

Click to zoom

GF60 machine gun replica
Manufacturer: GFC Guns
Product code: GFG-01-000855
Rating4/54.00 / 5 (1review)
Out of stock.
Ready to ship in days
Cost from 2,40 €
554,90 €
554.90 / 1pcs
  • Delicious

GF60 machine gun replica

GF60 is a faithful replica of the most famous machine gun of the XX. century. In this case we are dealing with the E4 version, designed specifically for the U.S. special units. 

The replica was constructed almost entirely of metal - the only elements produced from high quality plastic are the grips, front and pistol, the butt stock, and the magazine. Its structure is characterized by a considerable strength as well as appreciable weight - over 14 pounds. This is not a gun to run around with. But on the other hand - that's not what it was designed for. 

To manufacture this model, strengthened internal components, including metal cylinder head, reinforced heads and chrome-plated cylinder, piston, spring guide as well as equipped with the bearing were used. What we also have here are steel gears, in this case mounted on 8 mm bearings. 

The rifle is equipped with low-resistance wiring with MOSFET and, what's interesting - a potentiometer. Placed under the barrel, it allows you to regulate the rate of fire. During the tests, we could obtain any rate of fire from 320 to 630 RPM while using the stock battery. It is worth mentioning that the theoretical ROF of the original weapon was 550 RPM. 

What makes our offer different then that sold by our competition? Along with this high-quality replica, we deliver the highest quality cover for the magazine in two camouflages. The material used to produce it is CORDURA 1000D.
Kit includes: 
- GF60 replica
- box magazine
- CORDURA magazine cover
Tech specs:
Replika karabinu maszynowego GF60
GFC Guns
24 months
Velocity [FPS]:

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

Propulsion / Powered by:
Gearbox version:

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

Special Gearbox
Type of fire:
Lenght [mm]:

The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg.  folding stock or extended flash hider).

Inner barrel length [mm]:
Weight [g]:

This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.

Magazine type:
BOX magazine
Magazine capacity [pcs]:

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Yes, adjustable
Blow Back:

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

Made of:
Metal + plastic
Battery included:

NiCd rechargeable battery is characterized by high efficiency current-carrying capacity, but there are disruptive effect on memory. Should be unloaded and loaded in the full cycle, ie, it is recommended to fully discharge, and after unloading must charge the battery immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the life - on the other hand, they earn about 30% more capacity.

Users reviews
Number of reviews: 1 Average rating: 4.00
Rate: Rate: 4
Author: Pasi, Oulu
Cheap alternative for M60 support weapon. It shoots nicely out of the box, even though the hop up unit is really bad. Expect pot metal spot welding at places that will annoy you at some point. My guns feeding plate came of after a few minutes because bad spot welding, but I fixed it after a bit of modification. Also the magazine feeding tube gets in a way with the feeding plate, so also expect to little modification with it. Remember to put some thread locker to the front hand guard screws, otherwise it will wobble after a short time of handling. What really surprised me, was the easy way to remove the gearbox. It's a bit modified from the A&K M60VN, so you don't need to remove the shoulder stock! Just open the cover assembly, remove few screws from the sides and it's done. This is NOT a beginners gun! It's heavy, requires maintenance and upgrading to be a excellent fire support weapon.
Ask for this product:

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Your e-mail:
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
Recommend this product:

If you want to tell your friend about this product, please use the form below.

This field is required for placing an order.
You can add more e-mail addresses by separating them with a coma
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.