JG081-I Assault Rifle Replica
The replica is made from polymer and metal. Flash hider, RIS rails, trigger, trigger guard and fire mode selector are made from metal. The cradle, receiver, stock and magazine were made from polymer. The stock can be folded to the right side, which makes it much easier to transport the replica. The stock pad is made from rubber. The set includes a Hi-Cap magazine with a capacity of up to 150 BBs. Through the semi-transparent casing of the magazine the user can see BBs and springs inside.
The battery is stored in the forward grip. After the removal of a single pin it is possible to remove the hand guard. The double-sided fire mode selector makes the operation of the replica easy both for left- and right-handed users. Trigger guard is attached with two screws, which allows to set its position under different angle within a 180 degree range.
The set includes:
- JG081-I assault rifle replica
- Hi-Cap magazine (150 BBs)
- 1100mAh 8.4V battery
Replika Karabinka JG081-I
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Battery Capacity [mAh]:|
Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
plastic + metal
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Battery Voltage [V]:|
|Propulsion / Powered by:|