JG1738 assault rifle replica
The JG1738 belongs to the second generation of the JG replicas which base on the TM constructions and which are fully compatible with the elements and parts of this company. The front grip with the 22mm RIS rails, the outer barrel and the minor elements like the firing mode selector lever, the trigger, the pins and the screws are made of metal.
The replica, just like the original firearm is made of light and durable high quality plastic. The barrel and the RAS rail set which allows to attach different devices and accessories which meet that standard are made of metal. The replica’s body is nice in touch and resistant to mechanical damage and its proper balancing improves the overall maneuverability of the replica.
The whole is made in a modular system what allows for an easy exchange of the magazine well for a M4/M15/M16 standard. As it befits the JG company, reinforced torques and also a directional piston head were used in this replica what influences on the replica’s operational efficiency.
Another feature which increases the replica’s efficiency value is the ambidextrous firing mode selector lever. And the side folded stock. The replica is equipped with a bipod. Thanks to this, it is possible to make the replica a sniper rifle very easily and quickly.
The set includes:
- the replica,
- the magazine,
- a battery,
- a charger,
- a bipod,
Replika Karabinka - JG1738
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Metal + plastic
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
670 - 840
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Battery Voltage [V]:|
|Battery Capacity [mAh]:|
Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
|Dostawy i nowości:|