MK14 Crane Proto Rifle Replica
A replica made with the utmost care for details as well as the best possible representation of the original live firearm. The cradle of the replica, integrated with the stock and pistol grip, was made from a durable polymer of mat, olive colour. One-piece outer barrel, flash hider, magazine, trigger guard and miscellaneous elements (such as: tactical sling swivel) were made from steel. However, the receiver and charging handle were made from ZnAl.
The replica features a fixed stock with a hard rubber finish as well as a cheek pad with smoothly adjustable height. Access to the hop-up chamber is gained in a traditional way - after pulling back the charging handle. The outer barrel has a right hand, 14 mm thread which boasts a steel flash hider.
MK14 Crane Proto is equipped with 3 universal 22mm RIS mounting rails on the front cradle and a set of adjustable iron sights. Thanks to a set of rails there is no problem with attaching to the rifle any additional accessories. In the box can be also found a a vertical forward grip for a RIS rail. As is the case in live firearm, the safety is located near the trigger guard. The fire mode selector on the other hand, was placed on the right side of the receiver.
The replica is characteristic for its highly reliable operation and repeatability of consecutive shots. Inside is a well-fitted, tight system based on a reinforced gearbox v.7 with 7mm bearings as well as a set of steel gears, that guarantee a good base for potential tuning. A long, 470mm inner barrel will prove ideal for any long-range operations. The replica also uses low-resistance mini DEANS (T-connect) connector. The battery is stored inside the stock.
The replica comes with a steel, mid-cap magazine with a capacity of up to 160 BBs.
The set does not include a battery or a charger.
The set includes:
- vertical forward grip for RIS rail
Replika karabinu MK14 Crane Proto
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
|Diameter of bearings in GB [mm]:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
Metal + plastic
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.