PDW BY-806 replica
The BY-806 model was made of ABS plastic material. The upper receiver and the RIS rail is a one part along with the carrying handle which is also equipped with a RIS rail.
The elements which characterize this model among other PDW (Personal Defense Weapon – carbines/sub-machineguns in their shortest and lightest versions designed for helicopter crews, tank crews and drivers as a defensive weapon which can auto fire the AUTO firing mode) is its size, weight and, foremost, its versatility for both, left and right handed shooters. The replica is equipped with an ambidextrous firing mode selector lever thanks to which you can change the firing mode with the thumb or the index finger of both hands, it is also equipped with the so-called “multi magazine catch” – the ambidextrous magazine release lever. The weapon’s body is also equipped with a QD type attachment point.
The replica is equipped with a stock foldable to the side and which also minimizes the replica to the minimum of 450mm. On the top mounting rail, there are mounted the “flip up” type iron aiming sights which are perfectly made and, foremost, are functional and durable. After pulling the cocking handle, the bolt dummy reveals the Hop-Up adjustment knob.
The magazine which is included in the set is made of ABS plastic.
Inside of the replica, there is a V2 gearbox which is made of polycarbonate.
The set does not include a battery or a charger.
The set includes:
- the replica
- a magazine
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
ABS + aluminum
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
450 / 670
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.