• SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan
  • SA-H05 ONE™ Carbine Replica - Half-Tan

SA-H05 ONE™ Carbine Replica - Half-Tan

  • Length: 785/ 875 mm
  • Weight: 2985g
  • Colour: Black
  • Materials: zinc and aluminum alloy, steel, plastic
  • Muzzle Velocity: ~410 / ~310 FPS
  • Enter & Convert ™ quick spring change system
  • Manufacturer: Specna Arms
  • Product code: SPE-01-034404
310,61 €
310,61 €
/ pcs
Quantity
Add to wish list Compare
Ready to ship in
Paczkomatywysyłka inpost - NO
Cost from
Product description

SA-H05 Carbine Replica

The SA-H05 carbine replica by Specna Arms is made out of zinc and aluminum alloy, with the use of steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels) The butt plate and the pistol grip are made out of polymer plastic. The replica's body and the RIS rail set have been anodized, which guarantees a high degree of protection against corrosion. The painting of the replica itself was made by powdering, after the surface was sandblasted. This ensures a much higher than usual abrasion resistance of the applied paint. The manufacturers markings are located on the receiver.

The replica has been fitted very well - in a way that has been observed almost exclusively in G&P or Classic Army manufacturers - and perfectly balanced. This ensures perfect maneuverability of the replica, and its weight is almost imperceptible after placing the replica on the shoulder. 

The replica uses a quick spring change system, the so-called Enter & Convert ™. This allows for quick and efficient adjustment of the replica's power to the conditions expected in the game field without the need to have access to a workshop or a number of specialized tools - after removing the gearbox from the replica's body, the process of replacing the spring itself takes literally a few seconds.

The advantages of the Enter & Convert™ system cannot be overestimated. In the light of the tendency prevailing throughout Europe to apply legal limits of the muzzle velocity of the replica and the arrangements existing within the environments themselves, this system provides the user with considerable opportunities and a lot of freedom. The ESA ™ system allows you to quickly, with little to no effort change the main spring, and thus adjust the muzzle velocity of the replica to the requirements of the game organizer. This guarantees an ideal compromise between the effectiveness of firing your shots and your own safety and the safety of other players.

The replica has been fully adapted to work with LiPo and LiFe batteries. Thanks to the basic muzzle velocity of ~ 430 FPS guaranteed by the factory-installed main spring, the replica is perfect for middle-range operations. The set also includes an M90 spring, which allows you to reduce the initial muzzle velocity to ~ 310 FPS, making it the replica perfectly adapted to operate at short distances or inside buildings.

The gearbox, reinforced at the height of the cylinder head, houses a steel spring guide, which is an element of the Enter & Convert ™ system, and steel gears mounted on 8-mm ball bearings. The system is secured by means of four anti-reversal latches. A type 2 cylinder and a steel circuit-breaker are also used here. The replica is factory-fitted with an accurate, rotating, polymer Hop-Up chamber, which allows for a very precise and stable adjustment of the BB spin system.

The replica is equipped with a 22 mm RIS rail, a set of front RIS rails and an adjustable stock. Metal flip-up sights are mounted on the upper RIS rail, but they can be easily replaced by any optoelectronic sights. Thanks to the retractable stock with a non-slip texture stock, it is possible to adjust the length of the replica to the body type and preferences of the operator. The standard flash hider is mounted on a 14 mm left-hand thread, which allows the attachment of a silencer in its place.  To increase the realism, the replica was also equipped with a working bolt release mechanism.

Version 05 has a folding stock that can house a battery inside of it. The front of the replica is equipped with the M-Lock system which allows for individual RIS rails settings, according to the user's preferences. The set also includes a QD suppressor with a 14CCW thread.  

The set with the replica also includes a steel hi-cap magazine with a capacity of 300 BBs. 

Note! The set does not include a battery or a charger. 

The set includes:

- replica

- magazine

- mechanical sights

- additional main spring

Magazine compatibility chart

NiMH, Li-Po and Li-Ion batteries charging tips:

Write a review
Your review:
5/5
Add your own product photo:
If this description is not sufficient, please send us a question about this product. We will reply as soon as possible.

Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.

Fields marked with an asterisk are required
Recommend this product
If you want to tell your friend about this product, please use the form below.
You can add more email addresses by separating them with a coma
Fields marked with an asterisk are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel