SW-02A DMR Replica
SW-02A designated marksman rifle replica is almost entirely made from metal (including steel), the only elements made from high quality polymer are the pistol grip and internal gearbox elements. The receiver, RIS rail, barrel cover, bipod, magazine and transport handle were made from metal, while the stock pad was made from rubber in order to improve comfort of usage. The gearbox is a standard V2 unit that provides almost unlimited possibility of modification and power tuning. The 670 mm metal internal barrel has a diameter of 6.06 mm. The barrel length used in this model significantly improves accuracy. Hop Up chamber is compatible with M4/M16 TM.
The set includes:
- transport handle attached to a RIS rail
Replika karabinu wyborowego SW-02 - tan
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Metal + plastic
|Inner barrel length [mm]:|
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.