Ametralladora de airsoft ZB26
El diseño externo de réplicas no no deja nada que desear - el cuerpo, cañón externo y bipode son de metal, mientras que culata, grip y el mango son de madera.
La construcción de réplicas incluye mecanismo de rápido demonturaen el cañón conocido por el prototipo inflamable. Esto es tratamiento puramente cosmético, ya que en el caso de armas de airsoft no hay la necesidad de sustituir el cañón fundido por uno nuevo sobre el terreno. La textura de los elementos de madera se utilizó a propósito para dar a réplica el mejor reflejo posible del original de los años 20
Réplica tiene todos los rasgos constructivos externos característicos de su prototipo de combustible. Esto lo convierte en una excelente propuesta para amantes de las armas históricas y entusiastas de la recreación histórica Sólo se han aplicado pequeños cambios de diseño para la comodidad del usuario y del técnico, que se limitan a que usuario y técnico - se limitan al hecho de utilizar tornillos tornillos Allen y tornillos Philips en la construcción externa
El juego incluye:
- réplica
- cargador
- batería de 1100mAh 9.6V
- cargador
Batería recargable incluida NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Si |
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
Longitud del producto [cm] | 118 |
Peso del producto [g] | 5720 |
Propulsión | Accionamiento eléctrico |
Materiał | Madera Metal |
Velocidad de salida [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 300 |
Modo de disparo | Modo automático |
Versión del gearbox Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox special |
Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |