GKM carbine replica
The GKM carbine replica is made of steel and wood. Only the pistol grip was made of plastic. The stock's length fixed and the total length of the replica is 920mm.
The firing mode selection lever is located on the right side of the replica and is marked with graphic markings of the firing mode. The replica is equipped with the PBB system which perfectly imitates the operation of the original equivalent. It sets the bolt carrier dummy in motion and gives a perceptible "kick" effect felt on the shooter's shoulder.
After pulling the cocking handle, the dust cover opens and the bolt carrier's dummy moves backwards to the rear position. This allows to adjust the hop-up system.
The replica was made in black color. It is perfect to be used on middle and short distances.
An extraordinary Blow-Back system provides additional realism for the user of the replica and ensures additional experiences for the user himself.
The Pneumatic Blow-Back system operates on the principal of taking a part of the compressed air from the gearbox to a special cylinder that is located above the gearbox’s casing. The small piston that is located in the Pneumatic Blow-Back system moves a thin plate that is attached to it. The plate imitates the bolt carrier.
The G&G replica’s that are equipped with the Pneumatic Blow-Back system have got a reinforced and modified V.3 gearbox. The modification that was made was the adaptation of the gearbox to the Pneumatic Blow-Back system and adding the “active main spring release” button in the form of the actuator.
This model also uses an innovational powering system. Considering the problems with fitting the LiPo batteries under the bolt cover, the manufacturer introduced another solution – the LiPo battery was built in the front grip. The battery is a LiPo 11.1V 22C 1100mah battery. The set also includes a spare grip with a battery and a charger equipped with an balancer.
The set includes a battery and a charger.
The set includes:
- the carbine replica,
- a magazine,
- a LiPo battery in the grip – 2 pieces,
- a charger,
Batterij inbegrepen Akumulator NiCd cechuje się dużą wydajnością prądową, ale występuje w nich uciążliwy efekt pamięci. Powinny być rozładowywane i ładowane w pełnych cyklach, tj. zaleca się pełne rozładowanie, a po rozładowaniu należy akumulator niezwłocznie naładować nie pozostawiając go na dłużej w stanie rozładowanym. Akumulatory NiMH charakteryzują się szybszym czasem samorozładowania i krótszą żywotnością - z drugiej strony, osiągają one ok. 30% więcej pojemności. | Ja |
Blow Back Blow Back (BB) jest to system imitujący pracę zamka (odrzut podczas wystrzału), który spotykany jest najczęściej w modelach gazowych pistoletów i karabinów, jednakże co raz częściej pojawia się on także w replikach elektrycznych. Dzięki temu, strzelanie staje się bardziej zbliżone do ostrych odpowiedników, co zwiększa realizm podczas rozgrywek. Za każdym naciśnięciem za spust, replice towarzyszy tzw. "kopnięcie", czyli odrzut spowodowany zwrotnym ruchem zamka. | Ja |
Kleur | Diversen |
Product lengte [cm] | 92 |
Product gewicht [g] | 3700 |
Voortstuwing | Electrisch |
Materiał | Hout Metal |
Mondingssnelheid [FPS] Jest to prędkość kulki, w momencie opuszczenia przez nią lufy repliki. Mierzona jest w FPS (stopy na sekundę). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 420 |
Vuur modes | Full-auto Semi-auto |
Gearbox versie Oznaczenia v2, v3, v6 nie oznaczają stopnia zaawansowania mechanizmu ,a jedynie kształt zastosowanego szkieletu, który dobierany jest przez producenta w zależności od możliwości korpusu repliki. Przykładowo, repliki z rodziny M4/M16, MP5, mają gearbox v2, natomiast rodzina AK czy G36 gearbox v3. | Gearbox v3 |