TSG-552-STD carbine replica
The TSG-552-STD carbine replica is made of plastic and steel. The only element that is made of an alloy of zinc and aluminum is the outer barrel. The flash-hider, the RIS rail, the body, the trigger, the trigger guard and the firing mode selector lever are made of steel. The stock is foldable to the right side of the replica thanks to which the transport of it is facilitated. The stock’s foot is made of rubber. The set includes a real-cap type magazine holding 30 BB pellets. The use of an extended tappet plate makes that all BB pellets are shot. You can the fake bullets and the springs through the half see-through magazine case.
The replica is made by the G&G company on the license given by the Swiss-Arms company –the manufacturer of the real SIG 552 carbine.
The battery is located in the front grip. After removing the pin it is possible to take the front-grip away and to take the replica apart on two parts. The gearbox is equipped with a system of plugs transmitting the power instead of ordinary wiring. This allows to minimize the replica’s damage related to tearing off or cutting the wiring. The ambidextrous firing mode selector lever makes that the replica can be used by both, left and right-handed users. The trigger guard is mounted with the use of two screws thanks to which its position can be adjusted within the range of 180 degrees.
The compact size of the replica and the reasonable muzzle velocity make the replica a perfect solution to operate on short and medium distances – in particularly the CQB/MOUT type encounters. The highest quality of parts, the fitting and the operating culture are guaranteed by the G&G company’s fame.
The replica is equipped with steel thread-wheels that are placed on 6mm slide bearing, a reinforced spring guide and a piston’s head. The whole is put inside a reinforced V.3 gearbox. What is more, the replica is also equipped with a 275mm long 6,04mm precise inner barrel.
The set does not include the battery or the charger.
The set includes:
- the TSG-552-STD carbine replica,
- a magazine,
Blow Back Blow Back (BB) jest to system imitujący pracę zamka (odrzut podczas wystrzału), który spotykany jest najczęściej w modelach gazowych pistoletów i karabinów, jednakże co raz częściej pojawia się on także w replikach elektrycznych. Dzięki temu, strzelanie staje się bardziej zbliżone do ostrych odpowiedników, co zwiększa realizm podczas rozgrywek. Za każdym naciśnięciem za spust, replice towarzyszy tzw. "kopnięcie", czyli odrzut spowodowany zwrotnym ruchem zamka. | Nee |
Kleur | Grijs |
Product lengte [cm] | 74.50 |
Product gewicht [g] | 3010 |
Voortstuwing | Electrisch |
Materiał | Metal Plastic |
Mondingssnelheid [FPS] Jest to prędkość kulki, w momencie opuszczenia przez nią lufy repliki. Mierzona jest w FPS (stopy na sekundę). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 360 |
Vuur modes | Full-auto Semi-auto |
Gearbox versie Oznaczenia v2, v3, v6 nie oznaczają stopnia zaawansowania mechanizmu ,a jedynie kształt zastosowanego szkieletu, który dobierany jest przez producenta w zależności od możliwości korpusu repliki. Przykładowo, repliki z rodziny M4/M16, MP5, mają gearbox v2, natomiast rodzina AK czy G36 gearbox v3. | Gearbox v3 |
Hop-Up System Hop-Up służy do podkręcania kulki podczas wystrzału (wprowadzenie jej w obrót rotacyjny), dzięki któremu, przedłuża ona swój tor lotu. Działające prawa fizyki, powodują iż obrót kulki unosi ją do góry, natomiast siły grawitacyjne naturalnie ją przyciągają. Odpowiednie wyregulowanie Hop-Up, spowoduje wyrównanie tych dwóch zjawisk, co zaowocuje długim i prostym lotem na dłuższym dystansie oraz większeym skupieniem strzału (poprawienie celności). | Ja |