SA-V66 ONE™ TITAN™ V2 Custom Carbine Replica
Limited edition with TITAN™ V2 Advanced system by GATE installed!
Drop-In MOSFET type TITAN™ V2 controller set transforms an AEG into an advanced training replica. It provides a tactical advantage thanks to a lightning-fast trigger reaction time with the ability to modify the replica and adapt it to every mission with the help of 20 available functions. This is the most advanced and top model by GATE.
TITAN™ V2 controller will breathe new life into an ASG electric replica.
TITAN™ provides new possibilities:
- Trigger sensitivity adjustment
- Pre-cocking boost - adjustment of the time that the spring is being kept pulled (shortens the time between a squeeze of the trigger and firing)
- Adjustment of fire mode selector modes
- Burst mode
- Fire rate adjustment
- Notifies about a low battery level
- Protects battery from damage
- “Sniper delay”
- Full cycle detection
- AUG mode - the ability to set two trigger sensitivities (semi and full-auto)
Full system description: https://gunfire.com/en/products/titan-tm-v2-controller-set-full-set-rear-wired-1152218717.html
SA-V66 carbine replica by Specna Arms is made largely of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). The stock, magazine and the pistol grip were made from polymer. The receiver of the replica and the RIS handguard have undergone the process of anodizing, which guarantees a high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion.
The replica’s parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered.
The replica features a quick spring change system, so-called Enter & Convert™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring exchange lasts literally seconds.
The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and much freedom. Enter & Convert™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.
The replica is fully compatible with LiPo and LiFe batteries. Due to the base muzzle velocity of ~360 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows to reduce the muzzle velocity to ~300 FPS and as a result to adapt the replica for close-ranged and indoor operations.
A reinforced at the cylinder level gearbox contains a steel spring guide that is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and caps steel gears. The system is secured with four anti-reversal latches. A light, made from a polycarbonate polymer piston is equipped with a steel tooth in order to increase its durability. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.
The upgraded version features an array of new, reinforced parts such as:
- set of reinforced, steel gears
- steel spring guide
- lightweight, polymer piston
- aluminum air-sealed piston head
- metal cylinder head
- air-sealed, metal nozzle
The replica is equipped with a top RIS 22 mm rail, MLOK handguard and an adjustable stock. The top RIS rail features flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. The flash hider is based on a 14 mm left-handed thread, which allows the attachment of a silencer in its place.
In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.
The replica comes with a polymer, 300 BB, Hi-Cap magazine.
Specna Arms replicas are compatible with many magazines available on the market, from manufacturers like:
- BOYI
- Airsoft Systems
- SRC
- King Arms
- MAG
- STAR
- ACM
The set does not include a battery or a charger.
The set includes:
- replica with TITAN™ V2 unit installed
- USB plug for the control unit using GATE Control Station app
- magazine
- fixed iron sights
- additional main spring
Batterij inbegrepen Akumulator NiCd cechuje się dużą wydajnością prądową, ale występuje w nich uciążliwy efekt pamięci. Powinny być rozładowywane i ładowane w pełnych cyklach, tj. zaleca się pełne rozładowanie, a po rozładowaniu należy akumulator niezwłocznie naładować nie pozostawiając go na dłużej w stanie rozładowanym. Akumulatory NiMH charakteryzują się szybszym czasem samorozładowania i krótszą żywotnością - z drugiej strony, osiągają one ok. 30% więcej pojemności. | Nee |
| Kleur | Zwart |
| Product lengte [cm] | 62 |
| Product gewicht [g] | 2140 |
| Voortstuwing | Electrisch |
| Materiał | Metal Plastic |
| Mondingssnelheid [FPS] Jest to prędkość kulki, w momencie opuszczenia przez nią lufy repliki. Mierzona jest w FPS (stopy na sekundę). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 360 |
| Vuur modes | Full-auto Semi-auto |
| Gearbox versie Oznaczenia v2, v3, v6 nie oznaczają stopnia zaawansowania mechanizmu ,a jedynie kształt zastosowanego szkieletu, który dobierany jest przez producenta w zależności od możliwości korpusu repliki. Przykładowo, repliki z rodziny M4/M16, MP5, mają gearbox v2, natomiast rodzina AK czy G36 gearbox v3. | Gearbox v2 |
| Hop-Up System Hop-Up służy do podkręcania kulki podczas wystrzału (wprowadzenie jej w obrót rotacyjny), dzięki któremu, przedłuża ona swój tor lotu. Działające prawa fizyki, powodują iż obrót kulki unosi ją do góry, natomiast siły grawitacyjne naturalnie ją przyciągają. Odpowiednie wyregulowanie Hop-Up, spowoduje wyrównanie tych dwóch zjawisk, co zaowocuje długim i prostym lotem na dłuższym dystansie oraz większeym skupieniem strzału (poprawienie celności). | Ja |