TGR-418 Light carbine replica
The TGR-417 Light version replica made by the G&G company is made within the Top Tech series. Metal (including steel) and plastic was used to make this replica. The magazine, the dust cover, the actuator, the trigger and the flash-hider and also the iron aiming sights are made of steel. The stock’s foot, the body, the outer barrel and most of the minor elements are made of a homogenous alloy of zinc and aluminum. The stock’s foot is made of rubber. The stock’s length may be adjusted what allows to adjust the replica to the conditions and built of the user.
The firing mode selector lever is located on the left side of the replica and is marked with graphic signs of the replica’s firing modes. The replica is equipped with a PBB system which perfectly imitates the operation of the real weapon. It makes the bolt carrier’s dummy move and gives a “kick” effect that can be felt on the shooter’s arm.
After pulling the cocking handle, the dust cover opens and the bolt carrier’s dummy moves to the backwards position. This allows to adjust the Hop-Up system. What is interesting, the actuator has a function: after pressing it, the gearbox’s anti-reversal lever is released thanks to which the main spring is lose. This significantly extends the replica’s lifespan allowing to keep the high muzzle velocity by minimizing the spring’s exploitation effects.
The replica made in black color. It is perfect for operating in close and middle distances due to the fact of using the M100 spring that ensures the muzzle velocity og about 350 FPS. The top RIS rail allows to attach any kinds optical device. Moreover, thanks to the RIS rail set used in the place of the front-grip it is possible to mount additional accessories – a tactical vertical grip, a tactical flashlight, a laser target marker and so on…
The set also includes a RIS mounted rear iron aiming sight set.
The battery is placed inside a SF type stock. Thanks to the rather great space available inside of the stock is it possible to use a power source that has got rather big dimensions and what is followed by that – has got a big capacity.
The GR15 Raider XL carbine replica is perfect for a primary weapon. Thanks to the proper length of the barrels and a sealed pneumatic system that is equipped with a high class Hop-up chamber and Hop-Up rubber it was possible to reach a reasonable muzzle velocity and to keep a stable BB pellet trajectory and a good range at the same time. The muzzle velocity is proper to use the replica in CQB/MOUT type skirmishes safety and effectively, it can be also used in open terrains.
The carbine uses a phenomenal Blow-Back system known from the Top Tech replicas ( a more “professional” and, of course, more expensive G&G replicas series), which adds additional realism while using the replica and provides the user himself additional experiences.
The Pneumatic Blow-Back operates on the bases of retracting a part of the compressed air from the gearbox to a special cylinder located just above its frame. The pistol located in the PBB cylinder moves with a thin metal plate that imitates the move of the bolt carrier.
ATTENTION: The manufacturer does not recommend the use of batteries stronger than 8,4V due to the fact of the possibility of damaging the aforementioned plate.
The G&G replica equipped with the PBB system are equipped with a reinforced modified V2 gearbox. The modifications were based on adjusting the gearbox to the PBB system and adding an “active spring release” system in the form of the actuator.
The gearbox is equipped with 8mm metal ball bearing, a brass cylinder’s head and a aluminum piston’s head.
The set does not include the battery and the charger.
The set includes:
- the replica,
- a magazine,
Blow Back Blow Back (BB) jest to system imitujący pracę zamka (odrzut podczas wystrzału), który spotykany jest najczęściej w modelach gazowych pistoletów i karabinów, jednakże co raz częściej pojawia się on także w replikach elektrycznych. Dzięki temu, strzelanie staje się bardziej zbliżone do ostrych odpowiedników, co zwiększa realizm podczas rozgrywek. Za każdym naciśnięciem za spust, replice towarzyszy tzw. "kopnięcie", czyli odrzut spowodowany zwrotnym ruchem zamka. | Ja |
| Kleur | Zwart |
| Product lengte [cm] | 79 |
| Product gewicht [g] | 2800 |
| Voortstuwing | Electrisch |
| Materiał | Metal Plastic |
| Mondingssnelheid [FPS] Jest to prędkość kulki, w momencie opuszczenia przez nią lufy repliki. Mierzona jest w FPS (stopy na sekundę). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 350 |
| Vuur modes | Full-auto Semi-auto |
| Gearbox versie Oznaczenia v2, v3, v6 nie oznaczają stopnia zaawansowania mechanizmu ,a jedynie kształt zastosowanego szkieletu, który dobierany jest przez producenta w zależności od możliwości korpusu repliki. Przykładowo, repliki z rodziny M4/M16, MP5, mają gearbox v2, natomiast rodzina AK czy G36 gearbox v3. | Gearbox v2 |
| Hop-Up System Hop-Up służy do podkręcania kulki podczas wystrzału (wprowadzenie jej w obrót rotacyjny), dzięki któremu, przedłuża ona swój tor lotu. Działające prawa fizyki, powodują iż obrót kulki unosi ją do góry, natomiast siły grawitacyjne naturalnie ją przyciągają. Odpowiednie wyregulowanie Hop-Up, spowoduje wyrównanie tych dwóch zjawisk, co zaowocuje długim i prostym lotem na dłuższym dystansie oraz większeym skupieniem strzału (poprawienie celności). | Ja |