Réplica del fusil JG1838 eléctrica
La réplica de JG está hecha principalmente de plástico, con la excepción del riel RIS y el cañón exterior hechos de metal. La réplica tiene una empuñadura de pistola similar que en las réplicas del tipo P90, lo que permite a un agarre estable y seguro. Está equipada con una culata ajustable y una almohadilla para la mejilla que consta de cuatro superposiciones. Esto permite adaptar las dimensiones de la réplica a las necesidades del usuario. El visor está equipado con un ajuste de aumento que permite realizar disparos precisos. El set también incluye un bípode de plástico y está montado fijo en la empuñadura delantera. Gracias a sus dimensiones, y su largo cañón (550 mm), la réplica JG1838 es una base perfecta para afinar la potencia lo que la convertirá en una réplica de rifle para-francotirador.
El set incluye:
- réplica eléctrica de fusil JG1438 con bípode integrado,
- cargador tipo low-cap (20 bolas)
- batería 8,4V 1100 mAh
- cargador
- visor 3-9x40EG
- 4 cheek-pad adjustment overlays,
- 4 stock adjustment overlays,
Batería recargable incluida NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Si |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Longitud del producto [cm] | 99.70 |
| Peso del producto [g] | 6000 |
| Propulsión | Accionamiento eléctrico |
| Materiał | Metal Plástico |
| Velocidad de salida [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 390 |
| Modo de disparo | Modo automático Modo semiautomático |
| Versión del gearbox Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |