24 miesiące - Garantía concedida por el vendedor para 24 meses.
Ametralladora de
airsoft JG067MG
La ametralladora
de airsoft está hecha de plástico y metal. Las piezas de metal incluyen el raíl
de la culata, el guión, el selector de modo de disparo, el pestillo del
cargador de munición y el gatillo. La carcasa del cargador de munición y los 2
ganchos para la correa punto son de acero. La longitud ajustable de la culata
permite adaptar el arma de airsoft a la construcción y las preferencias del
usuario. Las dimensiones reducidas del arma de airsoft la hacen ideal para
operaciones en zonas urbanizadas y espacios pequeños y estrechos. La batería
está alojada dentro de la imitación del silenciador.
Con el arma de
airsoft se incluye un cargador de munición de tipo hi-cap con la capacidad para
250 bolas.
El kit incluye:
- arma de airsoft
- cargador de
munición
- batería
- cargador de
batería
- baqueta
- paquete de
bolas de prueba
- manual de
instrucciones
Batería recargable incluida NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Si |
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
Longitud del producto [cm] | 77 |
Peso del producto [g] | 1900 |
Propulsión | Accionamiento eléctrico |
Materiał | Metal Plástico |
Velocidad de salida [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 360 |
Modo de disparo | Modo automático Modo semiautomático |
Versión del gearbox Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |