Ametralladora de airsoft SR5-SD6
El SR5-SD6 es un excelente ametralladora de airsoft AEG , en el que el receptor superior es de chapa de acero, lo que distingue a esta serie de otras disponibles en el mercado. Acero es también aquí cargador y detalles como los soportes de las bandas. Otras piezas metálicas como cañón externo, la guía de la petaca o el silenciador son de aleación de aluminio. Al igual que en el original inflamable, la cubierta del supresor, el receptor inferior con gripem pistolaow y el pie de la petaca están hechos de plástico de nylon reforzado.
Características réplicas:
- acero receptor superior
- plegable culata con ajustable j length
- ajustable, dispositivos mecánicos opticas
- acero cargador hi-cap con una capacidad de 260 cartuchos
- selector de modo de disparo en ambos lados
- integrada supresor de sonido ficticio
El kit no incluye la batería y cargadores.
El kit incluye:
- réplica
- cargador
- manual de instrucciones
Batería recargable incluida NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Longitud del producto [cm] | 80.50 |
| Peso del producto [g] | 2925 |
| Propulsión | Accionamiento eléctrico |
| Velocidad de salida [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 300 |
| Modo de disparo | Modo automático Modo semiautomático |
| Versión del gearbox Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |
| Longitud mínima [mm] | 660 |