Replica subcarbina G-001
La réplica está hecha en su mayor parte de plástico. Los elementos fabricados en metal son el cañón exterior, el cañón interior y los raíles RIS de 22 mm situados en la parte frontal de la réplica. La réplica se alimenta eléctricamente. La batería está alojada en la parte delantera. La cómoda petaca, con pie de goma, está plegada hacia un lado. Esto permite utilizar la réplica en espacios reducidos.
Los raíles RIS situados en los laterales tienen una longitud de 100 mm y el raíl situado bajo la parte delantera tiene una longitud de 140 mm. Además de los raíles cortos, la réplica también está equipada con un raíl superior (245mm) que permite el uso de una mira óptica.
El kit no incluye batería ni cargador.
El kit incluye :
- réplica
- cargador hi-cap (300 cartuchos)
Batería recargable incluida NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Longitud del producto [cm] | 72 |
| Peso del producto [g] | 3000 |
| Propulsión | Accionamiento eléctrico |
| Materiał | Metal Plástico |
| Velocidad de salida [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 370 |
| Modo de disparo | Modo automático Modo semiautomático |
| Versión del gearbox Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |