Entrega de Specna Arms: ¡Cargador Easy, réplicas Flex y balas Ultra!
MonedaEntregaPolskaIdiomaGunfire PolskaGunfire in EnglishGunfire en FranceGunfire en EspañaGunfire ​​in NederlandGunfire in Czech
  • Pistola de airsoft CM125S MOSFET Edition - negro sin batería
  • Pistola de airsoft CM125S MOSFET Edition - negro sin batería
  • Pistola de airsoft CM125S MOSFET Edition - negro sin batería
  • Pistola de airsoft CM125S MOSFET Edition - negro sin batería
  • Pistola de airsoft CM125S MOSFET Edition - negro sin batería
  • Pistola de airsoft CM125S MOSFET Edition - negro sin batería

Pistola de airsoft CM125S MOSFET Edition - negro sin batería

  • Modelo MOSFET Velocidad inicial: ~200 FPS Longitud: 200mm Peso: 810g Fabricante: CYMA Cargador: 30 disparos
81,35 €
81,35 €
/ pcs
Cantidad
Añadir a favoritos Añadir a la comparación
Envío dentro de 24H
Terminales automatizadoswysyłka inpost -
Koszt dostawy desde 0,00 €
Formas de pago
Descripción del producto

Pistola de airsoft el MOSFET eléctrico CM125S

Réplica está hecho de plástico y metal duraderos. Las pequeñas piezas internas y las partes delgasynk son de metal. El marco y la cerradura réplicas son de plástico.

Réplica el MOSFET se alimenta eléctricamente para poder utilizarlo sin problemas durante los juegos de invierno. Una gran ventaja de este pistola es el sistema Hop-up, que permite aumentar el rendimiento de réplicas. La velocidad de descarga le permite utilizarla tanto en edificios como en distancias muy cortas.

Esta serie de pistolas de CYMA está equipada con un chipMOSFET incorporado, que mejora el rendimiento de réplicas como la respuesta a gatillo o el disparo rápido.

El diseño de réplicas permite tanto el fuego simple como el continuo. El selector de fuego del ala se encuentra en la parte trasera de la recámara, fusible mientras que en el lado derecho réplicas

Nota: Réplica no incluye una batería y cargadores.

Elkit incluye:

- réplica
- cargador low-cap para 30 bolas
- rápidocargador

Batería recomendada para este modelo :Akumulator Li-Po 7.4V 550mAh

Batería recargable incluida

NiCd rechargeable battery is characterized by high efficiency current-carrying capacity, but there are disruptive effect on memory. Should be unloaded and loaded in the full cycle, ie, it is recommended to fully discharge, and after unloading must charge the battery immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the life - on the other hand, they earn about 30% more capacity.

No
Blow Back

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

No
Longitud del producto [cm]
20
Peso del producto [g]
810
Propulsión
Accionamiento eléctrico
Materiał
Metal
Plástico
Velocidad de salida [FPS]

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

200
Modo de disparo
Modo automático
Modo semiautomático
Versión del gearbox

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

Gearbox special
Hop-Up

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Si
Rozwiń
Redacta tu opinión
Tu puntuación:
5/5
Añade tu propia foto del producto:
Si esta descripción no te resulta suficiente, envíanos tu pregunta acerca de este producto. Intentaremos responder a la mayor brevedad posible.

El tratamiento de los datos se realiza de conformidad con la política de privacidad. Al facilitarlos, aceptas las disposiciones contenidas en la misma.

Los campos marcados con asteriscos son obligatorios
pixel