Ametralladora de airsoft R1
Réplica La R1 Uzi de Well ha sido fabricada con plástico de alta resistencia, y gracias a su textura mate y antideslizante réplica se adapta bien incluso a una mano mojada o embarrada. Su diseño compacto y su pequeño tamaño hacen que este pistola sea extremadamente cómodo de usar, mientras que el plegado culata le permite ganar apoyo adicional mientras dispara, a costa de aumentar el tamaño de réplicas
El accionamiento eléctrico permite disparar de forma continua a una frecuencia de hasta 850 disparos por minuto, lo que en combinación con cargadorespara 190 balines garantiza una considerable potencia de fuego. La velocidad inicial de 240 FPS con el uso de perdigones de 0,12 g hace de esta réplicas un arma lateral ideal, garantizando una ventaja en caso de un enfrentamiento a corta distancia, con la posibilidad de un fuego efectivo a una distancia de hasta 40 metros. Al mismo tiempo, esta velocidad genera poca energía, lo que garantiza un uso seguro.
El juego incluye:
- réplica
- cargador
Batería recargable incluida NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Si |
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Si |
Longitud del producto [cm] | 65.50 |
Peso del producto [g] | 1215 |
Propulsión | Accionamiento eléctrico |
Materiał | Metal Plástico |
Velocidad de salida [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 240 |
Modo de disparo | Ráfaga de 3 disparos Modo automático Modo semiautomático |
Versión del gearbox Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v5 |
Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |