Réplica fusil AKBM (B.R.S.S.)
Réplica fusil AKBM(B.R.S.S.) fabricada por la empresa Taiwa BOLT Airsoft es sin duda un poderoso paso adelante en la evolución de réplicas AEG . Gracias a las soluciones innovadoras aplicadas, por fin ha sido posible acercar las sensaciones que siente el usuario de réplicas tipo AEG a las que ofrece réplicas tipo GBBR - así, en definitiva, la empresa BOLT Airsoft ha creado réplica fusil un ka que realmente "patea" como debe
Réplica se ha fabricado conmateriales de alta calidad en y con la máxima atención a los detalles. Réplica se fabrica en acero, madera y plástico. Acero es el cañón, la tapa de cierre, culata, la base del mosquete o la corredera. El grip pistola owy está hecho de plástico. No vamos a experimentar ningún juego aquí.
La mayor ventaja de este réplicas es, sin duda, elsistema de simulación del retroceso y del trabajo de la cerradura. En el interior de réplicas, se ha aplicado una imitación de un tobogán real, que está conectado a Gearbox. Con cada disparo la corredera se desplaza hacia atrás y gracias a un muelle vuelve a su posición original
Es importante señalar que, a pesar de algunas diferencias constructivas necesarias por el uso del sistema Blow Back, réplica se ajusta en gran medida a la norma v.3 establecida por TM. La diferencia significativa es realmente sólo el pistón con el recorte característico o el esqueleto Gerbox. La compatibilidad de las demás piezas de gearboxa garantiza una fácil puesta a punto de réplicas, así como un fácil acceso a las piezas de repuesto y de servicio en caso de necesidad. Lacámara de alta calidad Hop-up en combinación con elcañón de precisión 6.01mm garantiza un excelente rendimiento.
El compartimento de las pilas se encuentra en el interior de la petaca de madera
Nota: el juego no incluye una batería o cargadores.
El kit incluye:
- réplica
- cargador
- manual de instrucciones
Batería recargable incluida NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Si |
Longitud del producto [cm] | 91 |
Peso del producto [g] | 3400 |
Propulsión | Accionamiento eléctrico |
Materiał | Madera Metal Plástico |
Velocidad de salida [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 390 |
Modo de disparo | Modo automático Modo semiautomático |
Versión del gearbox Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |
Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |