Réplica Fusilel JG081-I
Réplica está hecho de plástico y metal. Bocacha el cañón, raíles RIS, gatillo, gatillou tapa y el selector de fuego son de metal. La cama, el barril, la petaca y cargador son de plástico. Culata el cañón se pliega hacia el lado derecho, gracias a lo cual el transporte es mucho más fácil réplicas. El pie de la petaca es de goma. El juego incluye cargador tipo hi-cap con capacidad para 150 bolas. A través de la carcasa translúcida magasynk se puede ver el bolas y los muelles del interior
La batería se encuentra en la empuñadura delantera. Después de quitar un PIN, es posible quitar la empuñadura delantera grip. El selector de tiro bilateral hace que la réplica pueda ser utilizada tanto por zurdos como por diestros. El escudo gatillou está montado sobre dos tornillos, gracias a los cuales su posición puede ajustarse en varios ángulos dentro del rango de 180 grados
Eljuego incluye:
- réplica
- cargador hi-cap
- cargador
- batería
Batería recargable incluida![]() NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Si |
Blow Back![]() Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Longitud del producto [cm] | 85 |
| Peso del producto [g] | 4600 |
| Propulsión | Accionamiento eléctrico |
| Materiał | Metal Plástico |
Velocidad de salida [FPS]![]() It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 350 |
| Modo de disparo | Modo automático Modo semiautomático |
Versión del gearbox![]() Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |
Hop-Up![]() Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Si |




