La réplica del fusil de asalto, que era un armamento principal del ejército estadounidense durante la guerra de Vietnam, está hecha de metal y plástico ABS. De ABS están hechos los paneles del cañón exterior, el cañón, el asa de transporte y el cañón. El cañón exterior y el gearbox son de metal. La carcasa del cargador corto, a menudo llamado "de vietnam", de tipo hi-cap (con capacidad para 190 bolas) también es de metal.
El cañón largo (510 mm) proporciona un disparo de alta precisión, que en combinación con la velocidad inicial de ~360 FPS, lo que convierte a esta réplica en un arma precisa. El cañón está acabado con una rosca en el sentido antihorario de 14 mm, lo que permite montar un silenciador. La empuñadura delantera, así como el asa de transporte, son típicas de la versión A1 del rifle.
La réplica cuenta con un gearbox reforzado y una guía de muelle metálica, así como con engranajes de acero con ocho trinquetes antirretroceso y un piñón de motor montado sobre cojinetes. Las piezas de JG son conocidas por su durabilidad y resistencia al desgaste, lo que mejora significativamente la vida útil de la réplica y también reduce los costes de una posible puesta a punto. Es importante mencionar también que la réplica está equipada con un motor Hi-Torque, un cilindro cromado y una cabeza de pistón direccional, lo que afecta en gran medida a su rendimiento y eficiencia.
El set incluye:
- réplica
- cargador
- batería
- cargador de batería
Tabla de compatibilidad de los cargadores
NiMH, Li-Po and Li-Ion batteries charging tips:
Nazwa | Replika karabinu JG1601MG |
Velocidad de salida [FPS]![]() It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | ~360 |
Versión del gearbox![]() Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
Modo de disparo | Ogień pojedynczy, ciągły |
Made of | plastic + metal |
Longitud [mm] | 995 |
Longitud interna del cañón [mm] | 509 |
Weight [g]![]() This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc. | 2550 |
Tensión de la batería [V] | 8,4 |
Capacidad de la batería [mAh]![]() Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer. | 1200 |
Batería recargable incluida![]() NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Jest |
Tipo de cargador de munición | Hi-Cap magazine |
Capacidad del cargador de munición [pcs] | 190 |
Hop-Up![]() Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
Blow Back![]() Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |