Specna Arms levering: Easy Charger, Flex replica's en Ultra BBs!
MunteenheidLeveringPolenTaalGunfire PolenGunfire in het EngelsGunfire in FrankrijkGunfire en EspañaGunfire in NederlandGunfire in Czech
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)
  • TK104 NV assault rifle replica (ASCU version)

TK104 NV assault rifle replica (ASCU version)

  • Made of: steel and plastic Weight: 3500g Length: 800-880 mm Muzzle velocity : ~415 FPS Magazine capacity : 600 BB pellets Powered by: a battery Version with ASCU electronic module Manufacturer : LCT
  • Productcode: LCT-01-005992
332,68 €
332,68 €
/ szt.
Aantal
Toevoegen aan favorieten Toegevoegd aan vergelijking
Verzending binnen 24H
Pakketautomatenwysyłka inpost - NEE
Koszt dostawy van 0,00 €
Betaalmethoden
Productbeschrijving

TK104 NV assault rifle replica (ASCU version)

A replica of the most famous Russian technical idea – the modified version of the  assault rifle designed by Michail Kalasznikow. The replica was made of the highest-class components with keeping a great attention to details and reproduction of the original .Despite some minor elements almost the whole replica is made of metal. The plastic pistol grip, the stock and the foregrip are the exceptions.

Thanks to the used materials and the production quality, the replica is characterized by an essential durability. No lose places, production inaccuracies or inappropriate fittings is seen here. The whole construction seems to be a one solid element. The interior parts allow the replica to be tuned easily and ensure a long an trouble free operation in the basic configuration.

The replica guarantees a muzzle velocity of about 415 FLS what makes this rifle perfect for every assaultman. Simultaneously, the durability and production quality allows this replica to be used not only in standard event, but also as a simulation or stun replica.

The ASCU is a two-part electronic module ( the control module and the sensor module ) which, upon being installed in the Airsoft replicas, significantly improve their operation. The traditional joint module was replaced with a sensor module which monitors the actual position of the piston thread-wheel, the firing mode selector lever and the trigger. The gathered information is sent to the control module – in which the software located in the processor analyzes it and controls the replica’s motor with the use of the MOSFET active break.

ASCU Gen. 3+ includes the following upgrades: 

- added polymer padding to the circuit boards, protecting them from damage during installation
- obsolete short-circuit software removed, making shots in semi-auto much faster
- a dedicated H-U chamber makes it impossible to shoot when the magazine is empty
- every pull on the trigger results in a single shot, new system prevents any double-shots
- new cut-off lever and selector plate designed specially for the ASCU
- new, thicker wires
- no need to dremel or modify the reinforced gearboxes.

The ASCU improves the operation of a V.3 gearbox and makes that the replica equals the more expensive replicas and the more sophisticated PTW class replicas. The ASCU system monitors the operation of the replica no matter the speed of squeezing the trigger and is responsible for the full cycle of the piston’s operation, both in the semi-automatic and full automatic firing modes. The piston stops in the starting position after each shot.

The ASCU is equipped with the Low Drain Protection system which is specially designed to secure the lithium-polymer (LiPo) batteries from being damaged.

In case of any emergency, the ASCU stops the firing mode in the replica and, therefore, secures the inner elements from further damage.

The ASCU is easy to install in the replica which is equipped in the V.3 gearbox. Most of the models does not require the modification of the airsoft rifle’s original parts. Yet, in some cases, some minor changes may have to be introduced – thanks to this the installation process will be completed without any problems.

 

The set includes:

- the replica
- a magazine

Blow Back

Blow Back (BB) jest to system imitujący pracę zamka (odrzut podczas wystrzału), który spotykany jest najczęściej w modelach gazowych pistoletów i karabinów, jednakże co raz częściej pojawia się on także w replikach elektrycznych. Dzięki temu, strzelanie staje się bardziej zbliżone do ostrych odpowiedników, co zwiększa realizm podczas rozgrywek. Za każdym naciśnięciem za spust, replice towarzyszy tzw. "kopnięcie", czyli odrzut spowodowany zwrotnym ruchem zamka.
W modelach gazowych, system blowback działa dzięki przeznaczonej na ten cel większej części gazu, natomiast w replikach elektrycznych, zamek poruszany jest dzięki pracy silnika napędzającego cały mechanizm.

Nee
Product lengte [cm]
88
Product gewicht [g]
5500
Voortstuwing
Electrisch
Materiał
Metal
Plastic
Mondingssnelheid [FPS]

Jest to prędkość kulki, w momencie opuszczenia przez nią lufy repliki. Mierzona jest w FPS (stopy na sekundę).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

410
Vuur modes
Full-auto
Semi-auto
Gearbox versie

Oznaczenia v2, v3, v6 nie oznaczają stopnia zaawansowania mechanizmu ,a jedynie kształt zastosowanego szkieletu, który dobierany jest przez producenta w zależności od możliwości korpusu repliki. Przykładowo, repliki z rodziny M4/M16, MP5, mają gearbox v2, natomiast rodzina AK czy G36 gearbox v3.

Gearbox v3
Hop-Up

System Hop-Up służy do podkręcania kulki podczas wystrzału (wprowadzenie jej w obrót rotacyjny), dzięki któremu, przedłuża ona swój tor lotu. Działające prawa fizyki, powodują iż obrót kulki unosi ją do góry, natomiast siły grawitacyjne naturalnie ją przyciągają. Odpowiednie wyregulowanie Hop-Up, spowoduje wyrównanie tych dwóch zjawisk, co zaowocuje długim i prostym lotem na dłuższym dystansie oraz większeym skupieniem strzału (poprawienie celności).

Ja
Inner barrel lengte [mm]
363
Rozwiń
Je beoordeling schrijven
Jouw beoordeling:
5/5
Eigen afbeelding van het product toevoegen:
Als de bovenstaande beschrijving voor jou onvoldoende is, stuur ons dan jouw vragen over dit product. We doen ons best om zo snel mogelijk antwoord te geven.

De gegevens worden verwerkt in overeenstemming met privacybeleid. Als je ze verstuurt, accepteer je haar bepalingen.

De velden die zijn gemerkt met een sterretje zijn vereist
pixel