The Specna Arms SA-H12 ONE™ Kestrel™ ASG Carbine ETU
The Kestrel Module™ V2 Basic ETU by Eshooter is an advanced ETU system characterised by ease of use, robustness and functionality. The Kestrel™ V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overloads due to motor damage or battery drain.
Functions of the Kestrel system™ Basic:
-Pre-cocking programmable in 5 stages with piston position learning.
(function requires a few single shots after connecting the battery for calibration)
-Active Break. The replica performs a full cycle with each shot, so no unnecessary overloads are created in the GB due to performing part of the cycle.
-Locked Rotor Protection, feature protects the inside of the replica in the event of motor damage
-Battery Drain Protection. Battery Drain Protection. The motor vibrates, the blue LED illuminates five times to indicate battery discharge
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different numbers of cells and voltages from 6V to 17V.
The Specna Arms SA-H12 ONE™ Kestrel™ ETU ASG Carbine
Model SA-H12 ONE™ Kestrel™ ETU by Specna Arms is a replica, which will be suitable for both CQB games and shooting events organised in the woods. It is made of high quality, durable materials such as steel, zinc and aluminium alloy, as well as plastic. When painting the replica, a powdering process was used, which increases the abrasion resistance of the paint.
The Specna Arms SA-H12 ONE™ Kestrel™ ETU ASG Carbine is equipped with a Gearbox that includes:
- 8-millimetre ball bearings
- steel gears
- four anti-reverse pawls
- type 2 cylinder
- steel cut-off lever
Characteristics The Specna Arms SA-H12 ONE™ Kestrel™ ETU ASG Carbine :
SA-H12 ONE™ Kestrel™ ETU is a very well-fitted and balanced airsoft gun that will also give you great maneuverability. This model features the Enter & Convert™ quick-change spring system, allowing you to change the spring in seconds. In this way, you can replace the factory-installed spring with an M90 spring, which is also included in the kit. This procedure reduces the firing speed of the airsoft gun from ~410 FPS to ~310 FPS, so that it can also be used during games organised indoors .
Main features of the replica:
- anodised body and RIS rail assembly (dorsal 22mm RIS rail and modular front)
- steel screws, pins and tactical sling handle
- polymer pistol grip
- gearbox reinforced at cylinder height
- rotating Hop-Up chamber for precise ball cocking
- metal sighting instruments of the flip-up type
- polymer buttstock that can be extended
- flame suppressor mounted on 14mm left-hand thread
- equipped with double-sided manipulators: fire selector, magazine release and dummy release for the Bolt-Catch system
- operable breech release
- steel magazine type Hi-Cap holds 300 rounds
Package include:
- Magazine
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 820 |
| Product weight [g] | 3000 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 410 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |