The ASG E&C EC-645 Kestrel™ ETU
The Kestrel module™ V2 Basic ETU by Eshooter is an advanced ETU system characterised by ease of use, robustness and functionality. The Kestrel™ V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overloads due to motor damage or battery drain.
Functions of the Kestrel system™ Basic:
-Pre-cocking programmable in 5 stages with piston position learning.
(function requires several single shots after battery connection for calibration)
Binary trigger
-Active Break. The replica performs a full cycle with each shot, so no unnecessary overloads are created in the GB due to performing part of the cycle.
-Locked Rotor Protection, feature protects the inside of the replica in the event of motor damage
-Battery Drain Protection. Battery Drain Protection. The motor vibrates, the blue LED illuminates five times to indicate battery discharge
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different numbers of cells and voltages from 6V to 17V.
The ASG E&C EC-645 Kestrel™ ETU carbine
The carbine constructed of metal and polymer, it has a 10-inch-long blade with the M-LOK system.
mechanical Flip-Up sights, functioning bolt-catch, an ergonomic pistol grip padded with a rough surface that will facilitate control of the carbine during use. Also worth mentioning is the ergonomic buttstock, which features rubber panels with a non-slip texture.
The rifle has been fitted with RIS rails that will allow additional accessories to be mounted.
Commodity features:
-Kestrel™ ETU
-10-inch M-LOK handguard
-Ergonomic pistol grip and stock with non-slip inserts
-Lightweight, well-fitted construction
-Rotational Hop-Up chamber
-Functional bolt-catch
-Exchangeable stock foot
Package include:
- Magazine
- Replica
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Colour | Grey |
| Product length [cm] | 78 |
| Product weight [g] | 2235 |
| Power supply | Electric |
| Material | Rubber Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 430 |
| Fire mode | Full-auto Adjusted burst Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |