CurrencyDeliveryPolandLanguageGunfire PolskaGunfire in EnglishGunfire en FranceGunfire en EspañaGunfire ​​in NederlandGunfire in Czech
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back
  • GR16 R4 assault rifle replica - Pneumatic Blow-Back

GR16 R4 assault rifle replica - Pneumatic Blow-Back

  • Length: 875 mm Weight: 3220 g Made of: plastic and metal Muzzle velocity: ~330 FPS
  • Product code: GIG-01-001734
361,75 €
361,75 €
/ pcs
Quantity
Add to Favorites Compare
Ready to ship in 24H
Paczkomatywysyłka inpost - NO
Delivery cost from 0,00 €
Payment methods
Product description

     GR16 R4 assault rifle replica - Electric Blow-Back


The R4 is a modified version of the valued GR16 replica. In comparison to its predecessor the manufacturer added a front RIS grip, a detachable iron sight, a tactical vertical grip and RIS rail cover panels. This model is also equipped with a fixed capacious stock. The transport of the battery will no longer stand a problem. The properly working PBB system imitates the movement of the bolt carrier just like it takes place in the real firearm.

 

The Pneumatic Blow-Back system operates on the basis of venting some of the compressed air from the gearbox to a special cylinder that is located above its grams. The piston that is located in the PBB cylinder moves the thick plate that is attached to it and that imitated the bolt carrier.

 

ATTENTION: the manufacturer does not recommend the use of batteries stronger than 8,4V due to the fact of the possible damage to the aforementioned plate.

 

The G&G GR16 R4  replica was made within the full metal standard. Just like in the real firearm, the body, the fore-grip, the front RIS grip, the iron aiming sights, the barrel and the flash-hider were made of metal. The manufacturer has also added a few steel elements which may be endangered by damage or a shorter lifespan: the trigger, the trigger guard, the magazine release button, the bolt catch lever, the actuator and the dust cover.

 

The fixed stock, the pistol grip and the cover panels are made of durable plastic.

 

As it befits the G&G company all of the details are perfectly replicated. The body bears the markings and each model has its own unique serial number. The manufacturer’s markings are also engraved on the replica and the magazine is decorated with a 5.56mm x 45 sign. The plastic made elements have got a facture that is nice in touch and a nice color.

 

The replica is equipped with a functioning bolt catch lever. After we push the bolt catch and pull the bolt carrier replica is the backwards position we gain access to the Hop-Up system. After pressing the bolt catch button one more time the bolt carrier replica goes back to its place just like in the real firearm.

 

The G&G replicas equipped with the PBB system have got a reinforced modified V3 gearbox. The modifications are: the adaptation of the gearbox to the PBB system and adding the “active spring release” in the form of the actuator. It is not possible to use any other gearbox frame  that operates with the PBB system and the active spring release system at the same time.

 

Additionally, the gearbox is equipped with:

 

  • A ball bearing main spring guide,
  • 8mm ball bearings,

  • A ball bearing aluminum piston head,

  • A sealed nozzle,

  • The MOSFET system,

  • A reinforced piston without the second teeth,

  • A low-resistance wiring,

  • A M90 main spring,

 

 

  The set includes:

 

 

-          The replica,

-          A  magazine

-          A tactical vertical grip,

-          A wrench,

Blow Back

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

Yes
Colour
Black
Product length [cm]
87.50
Product weight [g]
3220
Power supply
Electric
Material
Metal
Plastic
Muzzle velocity [FPS]

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

330
Fire mode
Full-auto
Semi-auto
Gearbox version

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

Gearbox v2
Hop-Up

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Yes
Show all
Write a review
Your review:
5/5
Add your own product photo:
If this description is not sufficient, please send us a question about this product. We will reply as soon as possible.

Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.

Fields marked with an asterisk are required
pixel