GR4 FF26 electric assault rifle replica
The GR4 FF26 electric assault rifle replica is made by the G&G company. Metal, including steel, and plastic was used to make this replica. The dust cover, the actuator, the trigger and the muzzle flash and also the iron aiming sights were made of steel. The stock's pipe, the body, the outer barrel and most of the minor elements were made of an homogenous alloy of zinc and aluminum. The stock's foot was made of plastic. The stock's length is adjustable what allows to adjust the replica to the conditions and built of the user.
The firing mode selection lever is located on the left side of the replica and is marked with graphic markings of the firing mode. The replica is equipped with the PBB system which perfectly imitates the operation of the original equivalent. It sets the bolt carrier dummy in motion and gives a perceptible "kick" effect felt on the shooter's shoulder.
After pulling the cocking handle, the dust cover opens and the bolt carrier's dummy moves backwards to the rear position. This allows to adjust the hop-up system. What is important, also the actuator plays an important role here: when it is pressed, the anti-reversal lever located in the replica's gearbox is released thanks to what the main spring is released. This significantly extends the replica's lifespan and allow to preserve the high muzzle velocity by minimizing the main spring's wear effect.
The replica was made in the colors of black, with contrasting pink elements.. It is perfect for fighting on short and middle distances due to the use of the M110 main spring that guarantees the muzzle velocity of about 360 FPS. The use of single top RIS rail allows for the attachment of any given optical aiming device. Moreover, thanks to the complete RIS rail system that is located in the place of the front grip it is possible to attach any willing optical aiming sight. The battery is placed inside the front grip.
The GR4 FF26 electric assault rifle replica is perfect to be used as a primary assault weapon. Thanks to the applied barrel length and the sealed pneumatic unit which is equipped with a high quality hop-up chamber and rubber allow to reach the reasonable muzzle velocity and to preserve a stable BB pellet trajectory and great range. The muzzle velocity is proper so it is safe and effective to use the replica on both, CQB/MOUT and open area skirmishes.
An extraordinary Blow-Back system, known from the Top Tech replica ( the more “professional” and what follows it – the more expensive G&G line ), provides additional realism for the user of the replica and ensures additional experiences for the user himself.
The Pneumatic Blow-Back system operates on the principal of taking a part of the compressed air from the gearbox to a special cylinder that is located above the gearbox’s casing. The small piston that is located in the Pneumatic Blow-Back system moves a thin plate that is attached to it. The plate imitates the bolt carrier.
ATTENTION: The manufacturer does not recommend using batteries stronger than 8,4V due to the fact of the possibility of damaging the aforementioned plate.
The G&G replica’s that are equipped with the Pneumatic Blow-Back system have got a reinforced and modified V.2 gearbox. The modification that was made was the adaptation of the gearbox to the Pneumatic Blow-Back system and adding the “active main spring release” button in the form of the actuator.
The gearbox is equipped with 8mm ball bearings, a brass cylinder's head and an aluminum piston head.
The set does not include a battery and a charger.
The set includes:
- the carbine replica,
- a magazine,
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Yes |
| Colour | Pink |
| Product weight [g] | 3500 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 410 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Inner barrel length [mm]. | 247 |