TGM PM5 A4 RTB EBB sub-machinegun replica
The TGM A4 RTB sub-machinegun replica is made of high quality plastic and steel. The elements such as the body, the iron aiming sights, the magazine and the mounting screws are made of steel. The outer barrel and the stock’s pipe are metal. The stock is made of plastic and is equipped with a rubber stock’s foot. It is adjustable in three-position. This allows to adjust the replica to the operator’s silhouette. It also a great solution whenever the need to change the battlefield from an open area to an urbanized area occurs.
In order to gain access to the Hop-Up chamber all you need to do is pull the cocking handle and block it in the backwards position. The replica uses an uncommon solution if it comes to the battery. The battery is inbuilt for good in the front-grip. No wiring, plugs or elements that could be broken or damaged significantly influences the comfort of use of the replica. The manufacturer includes with the set two such foregrips and a dedicated flashlight with charger.
The replica is equipped with a EBB system which perfectly imitates the operation of the real firearm’s bolt carrier. It makes the bolt carrier dummy move and gives a “kick effect” that can be felt on the shooter’s arm.
The set also includes an additional flash-hider which can be detached in the matter of seconds.
The set includes:
- the TGM PM5 A4 RTB EBB sub-machinegun replica,
- two front grips with inbuilt batteries,
- a magazine,
- a charger with wiring,
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | Yes |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Yes |
| Colour | Black |
| Product length [cm] | 68 |
| Product weight [g] | 2600 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 320 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 |