Product description
A&K M1 Airsoft Rifle Polymer Stock
A replica of the well-known American semi-automatic rifle from World War II - the M1 Garand. The replica is made from high-quality metal and polymer. The stock and handguard are made from plastic that resembles wood, both in colour and texture.
By pulling back the bolt, we gain access to the Hop-Up adjustment. The trigger block is located in a metal trigger guard, allowing for quick safety of the replica against accidental discharge. On the left side of the bolt, there is a selector switch for single/automatic fire mode. The replica also features a fully adjustable rear sight, also made of metal. The sights consist of an open, clearly visible front sight and rear sight. A dedicated magazine is included with the replica, which is inserted from the bottom, and the magazine release is located on the left side of the body.
Package include:
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity. | No |
| Bearings diameter [mm] | 6 |
Blow BackBlow back is a simulation system of the cocking lever - it imitates the
work of it as the equivalent sharp. This system raises the realism and
adds a lot more experience during shooting. | No |
| Colour | Others |
| Product length [cm] | 110 |
| Product weight [g] | 3975 |
| Power supply | Electric |
| Material | Metal Plastic |
Muzzle velocity [FPS]It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS | 400 |
| Fire mode | Full-auto Semi-auto |
Gearbox versionIndications v2, v3, v6 does not mean the level of advance, but only
shape of gearbox skeleton which was used and selected by the
manufacturer
depending on the capabilities of the body of the replica. For example,
a
models of the M4/M16 family, MP5, have a v2 gearbox, while the AK
family have gearbox v3. | Gearbox v7 |
Hop-UpHop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Inner barrel length [mm]. | 445 |
| Length minimal [mm] | 1120 |
| Magazine capacity [pcs.] | 20 |
| MOSFET/ETU | No |
| Quick Spring Change system | No |
| Type of plug | Tamiya small |
| Type of thread on the barrel | None |
Show all
