The Specna Arms SA-A34 ONE™ Kestrel™ airsoft rifle ETU
The Kestrel module™ V2 Basic ETU by Eshooter is an advanced ETU system characterised by ease of use, robustness and functionality. The Kestrel™ V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overloads due to motor damage or battery drain.
Kestrel system features™ Basic:
Binary trigger.The Replica will fire when the trigger is pressed, and another shot will be fired when the trigger is released.
-Pre-cocking programmable in 5 stages with piston position learning function.
(feature requires several single shots after battery connection for calibration)
-Active Break. The replica performs a full cycle with each shot, so that no unnecessary overloads are created in the GB by performing part of the cycle.
-Locked Rotor Protection, The feature protects the inside of the replica in case of motor damage
-Battery Drain Protection. Battery Drain Protection. The motor vibrates, the blue LED illuminates five times to indicate battery discharge
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different numbers of cells and voltages from 6V to 17V.
The Specna Arms SA-A34 ONE™ Kestrel™ ETU airsoft rifle
The Specna Arms SA-A34 Carbine replica is made predominantly from a uniform zinc-aluminium alloy, with the use of steel components at the most critical points of the replica (so all screws, pins and the tactical sling mount are steel). The stock and pistol grip are made of polymer polymer. The body of the replica and the RIS rail assembly have been subjected to anodisation process, which guarantees a high degree of protection of the replica against corrosion. The painting of the replica itself is done by a powder coating process, after the surface has been sandblasted. This ensures a much higher than usual abrasion resistance of the applied paint.
The replica has been very well-fitted - in a way previously seen almost exclusively in G&P or Classic Army manufacturers - and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, while its weight is, moreover, almost imperceptible once the replica is placed against the shoulder.
The replica uses the quick-change spring system, the so-called. Enter & Convert™. This allows for quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools - after removing the gearbox from the body of the replica, the spring replacement process itself takes literally seconds.
The advantages of the Enter & Convert™ system are difficult to overestimate. In light of the prevailing trend across Europe towards legal limits on replica discharge velocity and the arrangements that exist within the environments themselves, this system guarantees the user considerable options and a great deal of freedom. The Enter & Convert™ system allows with a minimum of time to replace the mainspringand thus to adapt the replica's exit velocity to the playing area so as to guarantee an ideal compromise between the effectiveness of the fire and the safety of oneself and other players.
The replica has been fully adapted to work with batteries of the type LiPo and LiFe. With a base initial discharge velocity of about ~410 FPS guaranteed by the factory-installed mainspring, the replica is perfect for medium range operations. Also included the M90-type springwhich reduces the initial velocity to ~310 FPS making the replica perfectly suited for short-range or indoor operations.
The gearbox, reinforced at cylinder head height, conceals a steel spring guide that is part of the Enter & Convert™ system and mounted on 8mm ball bearings and washers steel 16:1 gears made using CNC equipment. The system is secured with four anti-reverse pawls. The lightweight polycarbonate piston is fitted with a steel tooth to increase its strength. It also uses cylinder type 2 and steel cut-off leveras well as polymer hop-up chamber.
The replica also features a Specna Arms Dark Matter™ brushless motor (27000RPM).
Upgraded version has a number of new reinforced parts such as:
- a set of reinforced steel gears
- a steel spring guide
- a lightweight polymer piston
- a sealed aluminium piston head
- a sealed metal cylinder head
- a sealed metal nozzle
The Upgraded version is fitted with a 22mm dorsal RIS rail, a set of front MLOK rails and an adjustable SF-type stock. A flip-up sighting device has been fitted on the upper RIS rail, but can be freely replaced by any optoelectronic sighting device. Thanks to the sliding buttstock finished with a foot with an anti-slip texture, it is possible to adjust the length of the replica to the build and preferences of the shooter. The flame suppressor is mounted on a 14-mm left-handed thread, which makes it possible to attach a sound suppressor in its place.
To increase the realism of the gameplay, the replica is also equipped with a functioning breech release.
The replica also comes with a hi-cap magazine that holds 300 rounds.
The Specna Arms replicas are compatible with many magazines available on the market, such as.manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.
Package include:
- Hi-Cap Magazine
- Replica
- Iron sights
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
Battery included![]() NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
Bearings diameter [mm] | 8 |
Blow Back![]() Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
Colour | Chaos Grey |
Product length [cm] | 91.50 |
Product weight [g] | 2770 |
Power supply | Electric |
Material | Metal Plastic |
Muzzle velocity [FPS]![]() It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 410 |
Fire mode | Full-auto Adjusted burst Semi-auto |