SW-20AM Carbine Replica
Small arms in the bull-pup arrangement (sometimes known as bullless) have a long tradition and as many supporters as skeptics. One of the advantages of this type of construction is, however, difficult to challenge - it's the ability to use a really long and effective barrel while maintaining the relatively compact dimensions of the rifle itself. You can not forget about aesthetic values - bull-pupy are simply characteristic and can not be mistaken for anything else.
Similar to the original firearm, the replica's body was made of strong, polymer plastic. The metal was used to manufacture the entire front part of the replica together with the outer barrel and dorsal RIS rail, as well as small elements such as the shell ejector flap.
Both in the back and front of the replica, there are metal holders for mounting the tactical suspension. Access to the hop-up adjustment knob is standard, after pulling back the reloading handle and exposing the ejector window. The handle can be locked in the back position. What is characteristic for this construction, the ejector windows are located on both sides, thanks to which left-handed users will also have convenient access.
The replica's battery is inside the stock (as we can say it is bullless). To do this, simply remove the rubber buttstock. You do not need any tools for this, because it is mounted "push". It also takes a few seconds to unfold the entire rifle into two parts - when we want to get to the hop-up chamber and the inner barrel, for example. To do this, all you need to do is press the metal pin - the lock and slide out the fire selector, then slide the structure into 2 parts - the body and the front part with the telescope and the barrel.
The replica has a metal, integrated telescope with an adjustable cross sight as well as a long, all-metal silencer integrated with the barrel and two side RIS rails.
The carabiner has a two-stage trigger unit, which shallower pressing causes a single shot, while a deeper one - continuous fire. The fuse is located at the pistol grip and can be operated on both sides. At the front, under the barrel, there is a folding, 3-position vertical front grip characteristic of this rifle.
The replica is equipped with a quick spring change system allowing minimal replacement of the mainspring. There is no need to remove the gearbox and unscrew the entire structure: just remove the buttstock, unscrew the plastic cap, and then through the hole in the rear wall of the gearbox remove the guide with the spring. The system allows quick and efficient adjustment of the replica's power to the conditions expected on an airsoft battlefield, without the need to have access to a workshop or a number of specialized tools. We can now easily guarantee the perfect compromise between fire efficiency and the safety of ourselves and other players.
The replica comes with a plastic hi-cap magazine with a capacity of 330 BBs.
The set does not include a battery or a charger.
The kit includes:
- replica
- magazine
- carrying strap
- user manual
- bipod
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 95 |
| Product weight [g] | 3660 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 400 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 modified |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |