SA-FX02 FLEX™ HAL ETU
Specna Arms presents a line of replicas - FLEX™ HAL ETU
The base replicas in the FLEX are equipped with an electronic system based on magnetic sensors.
The circuit is configurable with a trigger.
Features of the system:
- trigger detection based on magnetic sensors and Hall effect
- active brake
- binary trigger
- adjustable trigger sensitivity (5 levels from 20 to 100%)
- adjustable pre-cocking (6 levels)
- programmable AUTO fire modes (full auto, semi, 3-rd burst, 5-rd burst)
- programmable SEMI fire modes (semi, binary, AUG, sniper)
- easy programming using the trigger
- low battery alarm.
Atractive price coupled with innovative spring replacement system and high-quality materials makes this series particularly attractive for beginner airsoft players.
The body, the front free float type, the slide including Light Ops Stock as well as the pistol grip are made from nylon fibre-reinforced polymer. Aluminium and zinc alloy was used for the barrel, flame suppressor, enlarged reloading handle and manipulators. All screws, pins, the shell ejection window and the dummy lock are made of steel. The barrel is marked with the serial number.
Light Ops Stock is a minimalist stock with a lightweight, impeccable and modernist design. The Light ops extendable stock has rubber non-slip stickers on both sides of the cheek piece, and a distinctive curved rubber stock foot that settles comfortably on the shoulder.
The replica has been very well-fitted the user will not experience any play between the lower and upper parts of the body. The use of a body and front made of lightweight polymer has allowed for a reduction in weight, making it ideal as a replica for dynamic CQB games. Furthermore, the nylon fibre reinforcement makes the construction more durable than other polymer constructions.
The replica uses the quick spring change system, ESA™. This allows you to quickly and efficiently adapt the replica's power to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools.
The replica has been fully adapted to work with battery types LiPo and LiFe. With a base initial discharge velocity of about ~350 FPS guaranteed by the factory-installed mainspring, the replica is ideal for medium range operations. An M90-type spring is also included, which allows the initial velocity to be reduced to ~300 FPS thus making the replica perfectly suited for short-range or indoor operations.
Inside you will find:
- 8-millimetre plain bearings
- steel gears
- polycarbonate polymer piston with full steel slat
- Type 2 cylinder
- steel cut-off lever
- rotary chamber Rotary Hop-Up
- high quality 6.03mm precision barrel
The flame damper is set on a 14mm left-hand thread.
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 84 |
| Product weight [g] | 2125 |
| Power supply | Electric |
| Material | Metal Nylon Polymer |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 350 |
| Fire mode | Full-auto Semi-auto |