airsoft Arcturus AK12 AEG FE™ carbine
A replica of the AK-12 carbine manufactured by Arcturus. The AK12 AEG was made mainly from steel and a few parts from aluminium and a durable polymer. Steel is used for the bayonet mount, the base of the musket with gas tube nut, the gas tube, the barrel holder, the cap, the dummy barrel, the selector, the barrel locking mechanism, the trigger guard, the barrel lock, the magazine lock and the dummy barrel. Aluminium is used for the barrel, 5-position stock guide, dorsal RIS rail and flame damper. Polymer is used for the magazine, stock with rubber feet, pistol grip and handguard with gas tube cover.
All parts are fitted with high accuracy, the metal parts have been finished with a non-corrosive matt coating. The interior of the replica provides very good performance in the factory configuration and a good base for tuning.
Inside the replica we find:
-6.03mm precision barrel
-Rotating Hop Up chamber
-21TPA motor
-18:1 steel gears
-CNC POM nozzle
-CNC machined stainless steel cylinder
-Piston with steel jaw
-Quick-change spring system with steel-bearing spring guide
The model belongs to the FE or Feature Enhanced series, which means that the replica is equipped with an optical, programmable control system.
Features of the FE ETU optical system:
-Pre-Cocking (7 degrees)
-Active Break (8 stages)
-Adjustable trigger hardness (5 degrees)
-Adjustable trigger reset (5 degrees)
-Progressive algorithm-guided trigger
-Adaptive hair-trigger
-Programmable fire modes
-Binary trigger with Ramping
-Low Battery Protection
-Electronic fuse
Package include:
- Deans adapter - small Tamyia
- Hi-Cap Magazine
- Mid-Cap Magazine
- Replica
- Iron sights
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product weight [g] | 3690 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 400 |
| Fire mode | 2-shot series Full-auto Adjusted burst Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
