ASR117R1 BOAR Carbine Replica
The rifle replica manufactured by APS is an innovative conceptual design. The rifle is built on the basis of a construction typical of the family of popular American rifles and is equipped with the modular KeyMod rail assembly which is becoming more and more popular.
The RIS 22mm rail allows for the installation of various types of optical sights. The set includes a set of folding, mechanical Fiber Optic flip-up sights. The sights deserve special attention, they allow you to fire the replice both from a high and low a profile, thanks to the possibility of setting the sights in two positions.
The KeyMod assembly is probably the most characteristic feature of the replica. The KeyMod is a universal mounting platform that allows the carabiner to be fully adapted to the individual needs of the user. This is an “open source” type project developed by Eric Kincel. You can attach dedicated segments to the KeyMod system, e.g. RIS rails (KeyMod nuts included) in any position and in any configuration, thanks to the holes arranged around the grip (KeyMod slots). The set includes a set of three 22mm RIS segments.
The replica is equipped with a telescopic RS-1 stock with an adjustable length, inside which a battery can be housed. One of the rails has room for mounting a QD swing swivel. The front and rear (two-sided) suspension points are made of steel. The swing swivels for mounting the QD type tactical slings are located on the bottom of the stock. The carabiner is also equipped with a special construction, enlarged reloading handle.
The heart of the replica is the V2 gearbox with a quick spring change system, from the latest eSilver Edge series with the High Torque motor. Housed within the replica is the SDU 2.0 chip which is fully programmable. The user is able to change his wherever and at any time he wishes. No additional external devices are needed. To use the chip, press the button located on the bottom of the front part of the gearbox frame. The button is located in the magazine slot. When pressed and held, the red LED should light up. The button should be held down until the LED blinks twice. We have one of five modes available to program:
Mode 1: Safe-Semi-Auto (factory setting)
Mode 2: Safe-Semi-Burst (3)
Mode 3: Safe-Burst (2) -Auto
Mode 4: Safe-Burst (3) -Auto
Mode 5: Safe-Burst(3)-Burst(9)
Double pressing the button or disconnecting the battery will reset the system to factory settings.
The replica comes with a plastic hi-cap magazine with a capacity of 300 BBs
The set does not include a battery or a charger.
The set includes:
- replica
- magazine
- 3 RIS KeyMod segments
- mechanical flip-up glow-sights
- angular grip
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 92 |
| Product weight [g] | 2990 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 390 |