CZ 805 BREN A2 Assault Rifle Replica
A uniquely original CZ 805 BREN A2 assault rifle replica made under full license by Česká zbrojovka a.s. by ASG. The receiver was made from metal, similarly to mounting rails, fire mode selector plate and external barrel. The lower part of the receiver consisting of a pistol grip and a magazine socket made from very elastic polymer with an interesting, rough texture. Similar case concerns the stock and the stock slide. In order to manufacture elements that join the replica, such as pins, screws as well as the flash hider or the shell ejection window cover, the manufacturer has used steel, which is always a nice looking addition.
The replica contains a gearbox V3 with a reinforced metal skeleton that conceals a polycarbonate piston and its perforated head (during air compression, a seal is pressed against the sides of the piston, which results in its better tightness).Steel gears are mounted on 7 mm bearings. Parts of the entire construction fit very well together and the fact that it is a gearbox V3 allows the user to rest easily and not to worry about the availability of parts or their compatibility.
The hand guard of the replica has 3 removable Picatinny rails, which enable expansion of the replica with additional accessories. The very same rail has been attached along the entire top of the replica. At stock the rail includes adjustable flip-up iron sights made from polymer. We can of course remove and replace them with optics of choice, compatible with 22 mm rail.
The replica was made for both left- and right-handed users. This is expressed by a double-sided fire mode selector plate and the possibility of putting the charging handle to the other side. This simplifies disassembly of the replica after removal of several pins. The stock is foldable to the right side and has 5 settings. The battery (stick) is located inside the receiver. Access to the battery slot is gained after the detachment of the stock. The same place features a screw that when removed allows to rapidly change the spring without having to disassemble the gearbox. This allows to customize the replica to any conditions and requirements of a battlefield in the blink of an eye. The replica comes with a polymer, Hi-Cap magazine with a capacity of up to 550 BBs.
The set does not include a battery or a charger.
The set includes:
- replica
- magazine
- manual
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
Bearings diameter [mm] | 7 |
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
Product length [cm] | 84.50 |
Product weight [g] | 3200 |
Power supply | Electric |
Material | Metal Plastic |
Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 400 |
Fire mode | Full-auto Semi-auto |
Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |