24 miesiące - Warranty is granted by the retailer for a period of 24 months.
Replica of the JG0738 Gen.2 carbine
The replica, like the flammable original, is made mostly of lightweight and durable plastic. Metal is used for the external barrel , the flame suppressor, a set of mechanical sighting devices and the front RIS rail including the carrier belt clip. The slide dummy was made of steel. The overall design is exceptionally well fitted and balanced, the high manoeuvrability is further enhanced by the use of a side-folding flask body.
On the back and in the lower part of the front grip there are universal 22mm RIS mounting rails, which allow to equip the carbine with a whole range of additional accessories. The whole is made in a modular system which allows to easily exchange, for example, a magazine socket for an adapter to the M4/M16 standard. The battery is located inside the front grip, its removal takes a few seconds and requires the removal of one mounting pin. Both the reloading handle and the fire mode selector are both sides, ensuring comfortable operation for both right- and left-handed people.
The latest version of the replica features an innovative system for adjusting the rate of discharge. A special type of spring guide is mounted in the gearbox, the length - and thus the power of the replica - of which is adjusted by means of an Allen screw. The adjustment range is ~360-400 FPS. Access to the adjustment screw is extremely easy - just fold the buttstock and place the Allen key in the visible hole of the rear wall of the body and gearbox.
Also inside the replica has been made very carefully. The design is based on reliable gearbox v.3, which uses reinforced steel gears as well as directional piston head, which significantly affects the effectiveness of the replica. Gearbox in the latest version is also equipped with 7mm, steel slide bearings.
The replica comes with a plastic hi-cap magazine with a capacity of 470 rounds. It has hooks, allowing several magazines to be connected together.
The kit includes:
- replica
- magazine
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 7 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 86 |
| Product weight [g] | 2605 |
| Power supply | Electric |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 360 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |