• LiPo 7.4V 1300 mAh 20C Valken Energy Butterfly Battery Pack

LiPo 7.4V 1300 mAh 20C Valken Energy Butterfly Battery Pack

  • Voltage: 7.4V
  • Capacity: 1300 mAh
  • Discharge Voltage: 20C
  • Connectors: Tamiya mini + balancer port
  • Weight: 70 g
  • Measurements: (105 x 20 x 8 mm) x2
  • Product code: VLK-06-018470
31,28 €
31,28 €
/ pcs
Quantity
Add to wish list Compare
Ready to ship in
Paczkomatywysyłka inpost - YES
Cost from

Free return

We offer you quick and easy shopping in installments without leaving your home. You can apply for a loan online when placing an order.
Calculate installment
Product description

LiPo 7.4V 1300 mAh 20C Valken Energy Butterfly Battery Pack

Lithium-Ion-Polymer (LiPo) packs are successors to the known Lithium-Ion (LiIon) packs. The basic advantage of LiPo is undoubtedly the ratio of capacity to size. The packs are of very small size whilst maintaining a very large electric efficiency, which allows for choosing an appropriate pack for practically every AEG replica. They do not feature memory effect.  Can be charged very frequently, without the need to be fully discharged. Frequent charging is beneficial for every type of a battery.

It is crucial to remember not to discharge a LiPo pack to a level of less than 3V per cell and not to overcharge over 4.2V per cell. Another advantage of LiPo packs is a small percentage rate of self-discharge. An unused pack will lose approximately 3-5% of energy per month. It is important to pay attention to an unused pack as there is a risk that as a result of not being used over a prolonged period of time it can be discharged beneath the acceptable minimal value (3V per cell) and inadvertent chemical reactions may occur, which lead to a deterioration of the pack’s properties including a permanent damage and, in extreme cases, fire. An unused LiPo pack should be charged to an average of 70%.

Properly used, a LiPo pack has an exploitation period of on average 500-700 cycles. An important factor is the temperature that LiPo packs can work in. In contrast to other batteries, LiPo cells perform well in low temperatures.  However, they should be charged in room temperature. In order to maintain the good condition of LiPo batteries, it is required to balance them during charging with a service connector, which most LiPo packs have (a good LiPo charger features an inbuilt balancer).

Usage of Li-Po Batteries (PDF)

Black Friday - new products
new
Write a review
Your review:
5/5
Add your own product photo:
If this description is not sufficient, please send us a question about this product. We will reply as soon as possible.

Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.

Fields marked with an asterisk are required
Recommend this product
If you want to tell your friend about this product, please use the form below.
You can add more email addresses by separating them with a coma
Fields marked with an asterisk are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel