M45X-S Submachine Gun Replica
A unique M45 replica in X-S version made by known and well-liked by players ARES. The replica was made mainly of high-quality metal and durable polymer.
Metal parts include the receiver of the replica, RIS handguard or the stock latch with the stock slide. There is also no shortage of steel elements such as pins or screws. Polymer parts, on the other hand, include a comfortable pistol grip, an adjustable stock with a battery container or flip-up iron sights placed on the top RIS rail.
At first glance, this replica resembles another M4 / M16 replica, however, in this case this replica is fed from a 9 mm magazine. Remaining elements like the manipulator buttons are exactly the same as in AR15 carbine replicas.
An interesting solution is the possibility of rapid handguard change. The standard system enables adapting the length of the barrel to User preferences. It is worth noting that the entire operation does not require the use of any tools.
Another interesting solution is the foldable stock that holds special connectors - it is not possible to fire with the stock folded however.
The heart of this replica consists of a reinforced, dedicated gearbox, with a set of gears featuring an integrated EFCS module - Electronic Firing Control System. It controls the operation of the trigger box, allowing for a smooth operation and, above all, shortens the motor reaction time to a squeeze of the trigger. A standard connector cube was replaced with an electronic system. EFCS has an in-built MOSFET module.
EFCS significantly prolongs the lifetime of the mechanism, thus of the entire replica and allows to use a high-voltage battery, including LiPo. After purchasing an external, dedicated EFCS programmer, the User will gain the ability to set the sequence of fire modes, as well as the burst mode (3-BB fire).
The replica comes with two Mid-Cap magazines - the shorter holds 55 BBs and the longer one 125 BBs.
The set does not include a battery or a charger.
The set includes:
- replica
- magazine
- speedloader
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 60.50 |
| Product weight [g] | 2425 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 310 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox special |
| Hop-Up Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy). | Yes |
| Length minimal [mm] | 520 |
| Magazine capacity [pcs.] | 125 |
| MOSFET/ETU | Yes |
| Type of thread on the barrel | 14mm CW |