The SA-E06-H EDGE™ Heavy Ops Stock HAL² ™ carbine replica
EDGE™ is a Specna Arms replica line that combines a range of solutions and technologies that are difficult to find in other replicas on the market. It is a line that relies on both very good external workmanship, solutions that increase the versatility of the replica, prolong its life, facilitate fault diagnosis and susceptibility to power tuning. From the box you get a replica in which you do not have to make any modifications, but if you want - they will be fabulously easy.
The body is a Specna Arms proprietary design combining aesthetic qualities and high ergonomics. Each element has been made and fitted with attention to detail. The replica has been equipped with both sides selector, magazine release and steel sling eyelet. Additionally, a Nano Coating anti-scratch coating has been used to finish the barrel.
The rifle has been equipped with Specna Arms' advanced HAL² ™ electronic control system. It's a Polish chip in which the magnetic Hall effect-based trigger provides unprecedented sensitivity (up to 500 points), responsive operation, while being insensitive to dirt and external light. HAL² ™Widget works with all standard triggers, so you can choose from the numerous models on the market and personalise your replica even further. The built-in module Bluetooth® Low Energy allows for an easy and stable connection to your phone, and at the same time ensures a long battery life for your replica. Simply switch it on and settings can be configured straight away. On the other hand, a number of sensors watch over the replica's trouble-free operation and will prevent damage to the replica - should a problem be detected.
With the free app Speca Link™ Google Play or Specna Link™ App Store discover all the capabilities of the HAL² ™ chip. This intuitive and glove-friendly tool will allow you to quickly adapt the parameters of your replica to the requirements of a given shooter. You can create several profiles for one replica - with different settings or create accounts for several different replicas. Then all you have to do is select the option in the app and you're ready to play!
All the capabilities of HAL^2 and the Specna Link ™ app:
- adjustable trigger sensitivity,
- precocking for faster trigger response,
- selectable shooting mode: SINGLE, BINARY, SERIAL or AUTO and assign it to the selected selector position,
- adjustable series length,
- speed setting,
- protection of LiPo/LiIon batteries against over-discharge,
- magazine mode,
- continuously displayed battery charge status,
- save settings for various game modes,
- advanced telemetry data that can be collected in one place and performance monitored with it,
- ability to track the status of the replica in real time.
The model has been fitted with an adjustable Heavy Ops type stock. The Heavy Ops stock has been fitted with enlarged stock foot and rubber panels with non-slip texture. The stock design itself has been enlarged so that it seamlessly accommodates large capacity batteries, while maintaining an ergonomic shape.
The SA-E06-H carbine replica is equipped with a front free-float rail in the 22mm RIS mounting system.
In addition to a long, dorsal RIS rail on which folding sighting devices are placed, the replica has a short rail under the barrel and on the sides of the rail.
The carbine has a factory-installed MOSFET X-ASR Polish brand GATE. This is an unprecedented collaboration between a Polish manufacturer and a well-known airsoft gun factory. The highest quality MOSFET X-ASR will take care of the safety of the replica's components, improve trigger response and the life of the electronics and battery, and allow you to diagnose basic malfunctions inside the replica thanks to the built-in indicator LEDs.
The replica has a stock mounted in-stock precision internal barrel with a diameter of 6.03mm, which will ensure high accuracy and repeatability of shots fired. With the barrel cooperates rotating Hop-Up chamber new type, which allows for a very precise and stable adjustment of the ball cocking system.
The replica uses the fast spring replacement system, ESA™. It allows quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools - simply unscrew the stock guide to reveal access to change the spring without having to pull out, or disassemble the gearbox.
The advantages of the system ESA™ are difficult to overestimate. In light of the arrangements that exist within the environments themselves, the system guarantees the user considerable possibilities and a great deal of freedom. The ESA™ system allows minimal time to replace the mainspring and thus to adapt the replica's discharge velocity to the area of play, so as to guarantee the ideal compromise between the effectiveness of the fire and the safety of oneself and other players. Also included in the box with the replica is a second M90 mainspring, which is perfect for indoor games.
The heart of the replica is the ORION Gearbox based on a reinforced frame and equipped with a mainspring release function. The replica straight out of the box comes with a range of high quality parts, making it high performance and ready for further tuning. The ORION Gearbox is ready to work with M140 springs. Inside, components such as:
- reinforced polymer piston with full steel jaw
- aluminium sealed nozzle
- aluminium double sealed cylinder head
- polymer piston head with bearing
- bearing spring guide
- set of steel gears
- 8mm ball bearings
The replica box includes two S-MAG mid-cap magazines with a capacity of 125 rounds each. The S-MAG is an exclusive polymer magazine designed by Specna Arms. The distinctive texture composed of Specna Arms logos draws attention. The S-mag ensures trouble-free feeding of BBs, even at high ROF.
Package include:
- 2 x mid-cap S-MAG magazine
- Instruction
- Replica
- M90 additional spring
- Vertical Grip
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Half-Tan |
| Product length [cm] | 85.50 |
| Product weight [g] | 2635 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 380 |
| Fire mode | Full-auto Semi-auto |