Replica of SA-G01 carbine
The replica of SA-G01 carbine by Specna Arms was made mostly from uniform zinc and aluminium alloy, with the use of steel elements in the most critical points of the replica (so all screws, pins, as well as magazine and shell ejector cover are steel). The adjustable buttstock, which houses the battery, foregrip and pistol grip, is made of polymer plastic. The body of the replica, the grenade launcher and the transport grip have been subjected to an anodisation process, which guarantees a high degree of protection of the replica against corrosion. The painting of the replica itself was done using a powdering process, after the surface had been sandblasted. This ensures a much higher than usual abrasion resistance of the applied paint.
The replica has been very well-fitted - in a way that could previously only be observed almost exclusively in manufacturers of the G&P or Classic Army class - and perfectly balanced. This ensures almost ideal manoeuvrability of the replica, while its weight is, moreover, almost imperceptible once the replica is placed against the shoulder.
The replica uses a quick spring change system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica's power to the conditions expected on the playing field without the need to have access to a workshop or a number of specialised tools - after removing the gearbox from the body of the replica, the very process of changing the spring takes literally a few seconds.
The advantages of the Enter & Convert™ system are difficult to overestimate. In light of the prevailing tendency throughout Europe to apply legal limits to the firing speed of the replica and the arrangements that exist within the environments themselves, this system guarantees the user considerable options and a great deal of freedom. The Enter & Convert™ system allows minimal time to replace the mainspring and thus adjust the replica's exit velocity to the area of play to guarantee the ideal compromise between the effectiveness of the firearm and the safety of yourself and other players.
The replica has been fully adapted to work with LiPo and LiFe type batteries. With a base initial discharge velocity of ~410 FPS guaranteed by the factory-installed mainspring, the replica is perfectly suited for medium range operations. An M90-type spring is also included, which allows to reduce the initial velocity to ~310 FPS thus making the replica perfectly suited for short-range or indoor operations.
The gearbox, reinforced at the height of the cylinder head, conceals a steel spring guide that is part of the SAEC™ Systemand mounted on 8mm ball bearingsand washers steel gears. The system is secured by four anti-reverse pawls. The lightweight, polycarbonate plastic piston is provided with a set of steel teeth to increase its strength. It also uses a type 2cylinder and a steel interrupter. The replica is factory-fitted with an accurate, rotating, polymer Hop-Up chamberwhich allows very precise and stable adjustment of the bullet cocking system.
The Upgraded version has a number of new, reinforced parts such as:
- a set of reinforced, steel gears
- a steel spring guide
- a lightweight, polymer piston
- an aluminium, sealed piston head
- a metal cylinder head
- a sealed, metal nozzle
The Upgraded version is equipped with a 22mm RIS dorsal rail, located under the transport grip, and an adjustable flask. Thanks to the extendable buttstock, it is possible to adapt the length of the replica to the build and preferences of the shooter. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
To increase the realism of the gameplay, the replica is also equipped with a functioning breech release. A 40mm grenade launcher for gas grenades is also fitted.
The replica also comes with a steel hi-cap magazine that holds 300 rounds.
The Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.
The picture of the grenade is illustrative, it is not part of the kit. It must be purchased separately.
Additional accessories shown in the images are not included in the kit!
The kit does not include the battery and charger.
The kit includes:
- replica
- magazine
- mechanical sighting devices
- extra mainspring
- granulator 40mm
| Colour | Black |
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Product length [cm] | 88 |
| Product weight [g] | 3500 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 410 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v2 modified |