SA-G12V EBB airsoft rifle
Well known on the airsoft market, Specna Arms brand presents SA-G series! SA-G replicas with their level of performance can boldly compete with replicas of top manufacturers. G-Series are carbines in several interesting configurations, including models equipped with an integrated scope, red dot sight, bipod or front grip in KeyMod system.
The replica, just like the original, is made of verydurable polymer,metal and, in the most critical areas, steel (so all screws, pins and the tactical mount are steel). The replica is equipped with a front with RIS rails, which houses the battery.
The replica is characterised by avery good fit and is made of an eye-pleasing matt polymer. The most important elements are connected by pins, in this way we can change individual elements such as the magazine slot. Made of solid polymer, the replica's body hasan individual serial number, manufacturer's markings and aesthetic fire selector markings. The replica is equipped with a side folding adjustable buttstock, which facilitates transport as well as operation in cramped spaces of buildings. The replica's metal barrel is finished with a flame suppressor mounted on a 14mm CW thread.
The heart of the replica is a reinforced V3 LiPo Ready gearbox, the design is fully modifiable and compatible with standard parts, so the replica can be tuned at will. Instead of a classic connector, the replica is equipped with amicrostick - this releaseimproves theresponse of the mechanism to trigger presses,eliminates the possibility of burning contacts and alsoincreases the rate of fire.
The replica has been fully adapted to operate with LiPo and LiFe type batteries. Thanks to the base initial rate of ~380 FPS guaranteed by the pre-installed mainspring, the replica is perfect for medium range operations.
The replica featuresa quick spring change system - Enter & Convert™. To access the Gearbox, simply knock out the pin located at the stock lock, then pull out the stock locking element. You then gain access to the mainspring guide, which can be quickly and easily pulled out through the rear of the gearbox. This allows quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools. The entire spring change takes45 seconds and requires only one screwdriver.
The replica, as in the original, is adapted to be operated by both right- and left-handed people thanks to the double-sided fire selector.
The replica features an interesting solution in the form of the EBB (Electric Blow Back) system, this system moves the slide, increasing realism by bringing it closer to its flammable counterpart. This system can be easily deactivated by unscrewing a special guide connecting the piston with the dummy slide.
A Hi-Cap type magazine with a capacity of350 rounds is added to the kit.
Each replica undergoes, still at the factory,a zero inspection confirmed by a special certificate with a hologram and an individual serial number assigned to each replica.
The kit does not include a battery or charger.
The kit includes:
- replica
- magazine
- vertical grip
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | Yes |
| Colour | Tan |
| Product length [cm] | 78 |
| Product weight [g] | 5000 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 380 |
| Fire mode | Full-auto Semi-auto |
| Gearbox version Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3. | Gearbox v3 |