SA-H06 ONE™ Carbine Replica
The SA-H06 carbine replica by Specna Arms is made out of zinc and aluminum alloy, with the use of steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels) The butt plate and the pistol grip are made out of polymer plastic. The replica's body and the RIS rail set have been anodized, which guarantees a high degree of protection against corrosion. The painting of the replica itself was made by powdering, after the surface was sandblasted. This ensures a much higher than usual abrasion resistance of the applied paint. The manufacturers markings are located on the receiver.
The replica has been fitted very well - in a way that has been observed almost exclusively in G&P or Classic Army manufacturers - and perfectly balanced. This ensures perfect maneuverability of the replica, and its weight is almost imperceptible after placing the replica on the shoulder.
The replica uses a quick spring change system, the so-called Enter & Convert ™. This allows for quick and efficient adjustment of the replica's power to the conditions expected in the game field without the need to have access to a workshop or a number of specialized tools - after removing the gearbox from the replica's body, the process of replacing the spring itself takes literally a few seconds.
The advantages of the Enter & Convert™ system cannot be overestimated. In the light of the tendency prevailing throughout Europe to apply legal limits of the muzzle velocity of the replica and the arrangements existing within the environments themselves, this system provides the user with considerable opportunities and a lot of freedom. The ESA ™ system allows you to quickly, with little to no effort change the main spring, and thus adjust the muzzle velocity of the replica to the requirements of the game organizer. This guarantees an ideal compromise between the effectiveness of firing your shots and your own safety and the safety of other players.
The replica has been fully adapted to work with LiPo and LiFe batteries. Thanks to the basic muzzle velocity of ~ 410 FPS guaranteed by the factory-installed main spring, the replica is perfect for middle-range operations. The set also includes an M90 spring, which allows you to reduce the initial muzzle velocity to ~ 310 FPS, making it the replica perfectly adapted to operate at short distances or inside buildings.
The gearbox, reinforced at the height of the cylinder head, houses a steel spring guide, which is an element of the Enter & Convert ™ system, and steel gears mounted on 8-mm ball bearings. The system is secured by means of four anti-reversal latches. A type 2 cylinder and a steel circuit-breaker are also used here. The replica is factory-fitted with an accurate, rotating, polymer Hop-Up chamber, which allows for a very precise and stable adjustment of the BB spin system. The replica is equipped with a 22 mm RIS rail, a set of front RIS rails and an adjustable stock. Metal flip-up sights are mounted on the upper RIS rail, but they can be easily replaced by any optoelectronic sights. Thanks to the retractable stock with a non-slip texture stock, it is possible to adjust the length of the replica to the body type and preferences of the operator. The standard flash hider is mounted on a 14 mm left-hand thread, which allows the attachment of a silencer in its place. To increase the realism, the replica was also equipped with a working bolt release mechanism.
Version 06 has a folding SF type stock on a guide, the stock is also were the battery is housed. The replicas front is equipped with a RIS rail with the M-Lock system, which allows for the adjustment of the RIS rails, according to the user's preferences. The front also has 2 slots for a QD suspension sling.
The set with the replica also includes a steel hi-cap magazine with a capacity of 300 BBs.
Additional accessories shown in the photos are not included in the set!
The set includes:
- mechanical sights
- additional main spring
The set does not include a battery or a charger.
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Bearings diameter [mm]|
|Inner barrel length [mm].|
|Magazine capacity [pcs.]|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
|Automatic electric guns|
Metal + Tworzywo sztuczne + Stal
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Type of thread on the barrel|
|Quick Spring Change system|
|Type of plug|
|Muzzle velocity [FPS]|
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS