SA-J06 EDGE™ Carbine replica - ASTER V3 Version
EDGE ™ is a series of Specna Arms replicas that combines a range of innovative solutions and technologies difficult to find in other replicas on currently the market. The series focuses on a very good external build, solutions increasing the replica's versatility, longevity, facilitating failure diagnostics, and susceptibility to power tuning.
Replica Features:
- receiver made out of steel sheet
- steel, one-piece outer barrel
- metal hop-up chamber
- precise aluminum inner barrel with a diameter of 6.03mm
- ESA™ quick
spring replacement system - after removing the GB frame from the body,
spring replacement takes a few seconds. Without having to open the
gearbox itself,
- additional M90 main spring included
- pre-installed GATE ASTER™ V3 system
- reinforced ORION™ V3 Gearbox, which ensures high reliability. The mechanism is build to facilitate further tuning and is compatible with M140 springs. Inside the replica there are such elements as:
• reinforced polymer piston with a full steel jaw
• aluminum, double sealed cylinder head
• aluminum double sealed piston head with ball bearing
• spring guide with ball bearings
• set of steel gears
- muzzle device on 24mm CW / 14mm CCW thread
- so-called "dovetail" side mounting rail
- realistic VFC system contribution, based on pins, levers and pins
- a lot of space for a stick type battery under the dust cover (LiPo ready)
- adjustable, multi-position stock.
- magwell spacer insert for easy magazine reloading
- originally designed mid-cap S-MAG magazines with a capacity of 130 BBs.
Package include:
- 2 x mid-cap S-MAG magazine
- QC certificate
- Deans adapter - small Tamyia
- GATE ASTER diagnostic card
- Instruction
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
Bearings diameter [mm] | 7 |
Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
Colour | Black |
Product height [cm] | 11 |
Product length [cm] | 102.50 |
Product weight [g] | 3900 |
Product width [cm] | 27 |
Power supply | Electric |
Material | Metal Plastic |