SA-J11 EDGE 2.0™ Assault Rifle
The EDGE 2.0 ™ series introduces
a completely new quality product to
the Specna Arms replica family, adding new features and innovations to the
tried and tested design. As a result, Specna Arms EDGE 2.0 ™ assault rifles
offer an exceptional high level of craftsmanship and technical advancement
straight out of the box.
Features:
- receiver made out of steel sheet
- steel, one-piece outer barrel
- metal hop-up chamber
- precise aluminum inner barrel with a diameter of 6.03mm
- ESA2™ quick spring change system - after folding the stock and removing
the cover, we have access to the spring guide without the need to dismantle the
gearbox shell
- additional M90 main spring included
- pre-installed GATE ASTER™ V3 system
- reinforced ORION™ V3 Gearbox, ensuring high quality
operation. The mechanism is build to facilitate further tuning and is
compatible with M140 springs. Inside
the replica there are such elements as:
·
reinforced
polymer piston with a full steel jaw
·
aluminum,
double sealed cylinder head
·
aluminum double
sealed piston head with ball bearing
·
spring guide
with ball bearings
·
set of steel
gears
- muzzle device on 24mm CW / 14mm CCW thread
- side mounting rail of the "dovetail" type
- realistic structure in the VFC system, based on pins, levers
and pins
- a lot of space for a stick type battery under the dust cover (LiPo
ready)
- side-folding skeletal stock
- magwell spacer insert for easy magazine reloading
- originally designed mid-cap S-MAG magazines with a capacity of 130 BBs
Package include:
- 2 x mid-cap S-MAG magazine
- QC certificate
- Deans adapter - small Tamyia
- GATE ASTER diagnostic card
- Instruction
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Plum |
| Product length [cm] | 95 |
| Product weight [g] | 3340 |
| Power supply | Electric |
| Made of | Steel |
| Material | ZnAl Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 380 |