Silverback x Desert Tech MDRX V3 airsoft carbine
The MDR-X carbine replica is a licensed airsoft gun of its flammable counterpart from the Desert Tech workshop, which has already repeatedly demonstrated its ability to develop innovative platforms.
The MDR-X carbine is externally characterised by an incredible attention to detail and build quality. On the inside, however, care has been taken to implement interesting, simple but also revolutionary solutions.
The TDC system hop-up chamber made of polycarbonate is responsible for twisting the ball - it has 36 degrees of adjustment. The standard tab (low) is fitted to the replica straight out of the box. It generates pressure for standard BBs in the range from 0 to 750 μm. A high tab is also included for configuration under heavier BBs - 0.32 grams and heavier.
Product Features:
- Made under exclusive licence from Desert Tech LLC
- Barrel, barrel, discharge brake made from 6000 series aluminium
- MLOK handguard with windows at 3 , 6 , 9 o'clock.
- Fully engraved markings including unique serial number.
- Double-sided manipulators, including variable-sided shell ejector
- The handguard as well as the stock and grip made of glass fibre reinforced PA6 nylon.
inside the replica we find:
- Cylinder with a volume of 22.5cc - CNC aluminium, diameter 26mm
- Quick-change spring system
- "Tappet plate-less" construction
- Aluminium cylinder head (CNC) including NBR buffer, stainless steel nozzle.
- Ventilated piston head (CNC aluminium) including O-rings and POM guide O-ring
- Bearing-mounted spring guide
- Aluminium piston with complete steel jaw - 16 teeth.
- Gears 18:1 made of hardened steel
- 10 mm ball bearings
- Hi-Torque 19000RPM (11.1V) 28 TPA neodymium motor
- TDC Hop-up chamber
- Hop-Up rubber with 70 degree hardness
-reinforced gearbox shell
In addition, inside you will find an ECU based on Hall sensors created in collaboration with the T238 brand, which features:
- Interoperability with Li-Po 7.4V and 11.1V batteries
- Interoperability with brushless motors (with some caveats) - see additional description
- Series/binary fire mode, DMR delay, ROF settings, pre-cocking, sleep mode, active brake and battery protection against loss.
Additional features in the kit include:
- Additional springs of 80 and 100 N
- Drift pin
- Allen spanner 2/5 mm
- Hop-up distancer for BBs over 0.32 grams
Package include:
- Instruction
- Mid-Cap Magazine
- Patch
- Replica
- Allen key
Package exclude:
- The set does not include the battery nor charger
When using brushless motors, the manufacturer does not recommend the use of batteries with a voltage higher than 7.4V
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 10 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Half-Tan |
| Product length [cm] | 70 |
| Product weight [g] | 2650 |
| Power supply | Electric |
| Dystrybutor Odpowiedzialny w UE | GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 340 |
| Fire mode | Full-auto Adjusted burst Semi-auto |