Specna Arms AK SA-J10 EDGE Gen.2 AEG Assault Rifle
The model presented featuresa rotatingHop-Up Magnus TDC (Top Down Center)chamber, which will guarantee even better performance of the replica, and the HAL™ ETU system
Features of the HAL™ ETU Module:
- trigger detection based on magnetic sensors and Halleffect
- active brake
- binary trigger
- adjustable trigger sensitivity (5 levels from 20 to 100% )
- adjustable pre-cocking (6 levels )
- programmable AUTO fire modes (full auto, semi, 3-rd burst, 5-rd burst)
- programmable SEMI fire modes (semi, binary, AUG, sniper )
- easy programming using the trigger
- low battery alarm
EDGE™ is a line of Specna Arms replicas that combines a range of solutions and technologies that are difficult to find in other replicas on the market. It is a line that focuses both on very good external workmanship, solutions that increase the versatility of the replica, prolonging its life, facilitating the diagnosis of malfunctions, as well as susceptibility to power tuning.Straight out of the boxyou get a replica in which you do not have to make any modifications, but if you want - they will be fabulously easy.
The Specna Arms J-Series™ replica carbines are made largely from steel , with steel components including the barrel, breech cover, external barrel, trigger guard, magazine catch, selector wing, dummy gas tube, stock extractor, QD mounts and pins and rivets. aluminium is used for thesighting devices, the discharge device, the dovetail mount, the tactical sling mount on the butt, the slide with reloading handle, the butt stock, the pistol grip, the magazine, the handguard and the gas tube cover.
Inside you will find the Gearbox ORION™ V3, which is characterisedby a high stock culture . The mechanism is prepared for further tuning and ready to work with springs for the M140. the following components are fitted inside:
- Polymer piston with full steel jaw
- Double sealed aluminium cylinder head
- Aluminium sealed nozzle
- Polymer sealed piston head
- Polymer bearing spring guide
Features of the replica:
-HAL ETU system
- Rotary Hop-Up Magnus TDC (Top Down Center)chamber
- Sheet steel body
- Single-piece steel outer barrel
- Quick-change spring system Enter & Convert™
- side dovetail mounting rail
- plenty of room for stick battery under the breech cover (LiPo ready)
- adjustable, multi-position stock.
Package include:
- 2 x mid-cap S-MAG magazine
- Cleaning rod
- Replica
- Allen key
- Small Tamyia - Deans adapter
- BBs speedloader
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
NOTE!!!
When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module
| Based on | AK / AK74 / AK47 |
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 89 |
| Product weight [g] | 3355 |
| Power supply | Electric |
| Material | Aluminum Plastic |
| Made of | Steel |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 390 |
