Specna Arms SA-A03 HAL² ™ Chaos Bronzeairsoft rifle
The SA-A03 airsoft rifle by Specna Arms is made predominantly from a uniform zinc-aluminium alloy, with the use of steel elements in the most critical points of the replica (thus all screws, pins and the tactical sling handle are steel). The stock as well as the pistol grip are made of polymer polymer.
The replica has been equipped with an advanced electronic control system Specna Arms HAL² ™. It is a Polish system in which the trigger, based on the magnetic Hall effect, provides unprecedented sensitivity (up to 500 points), responsive operation, while being insensitive to dirt and external light. The HAL^2 Widget works with all standard triggers, so you can choose from the numerous models on the market and personalise your replica even further. The built-in Bluetooth® Low Energy enables an easy and stable connection to your phone, and at the same time ensures a long battery life for the replica. Simply switch it on and it is immediately possible to configure the settings. On the other hand, an array of sensors watches over the replica's trouble-free operation and will prevent damage to the replica - should a problem be detected.
With the free Specna Link™ Google Play or Specna Link™ App Store app, you will discover all the possibilities of the HAL² ™ chip. This intuitive and glove-friendly tool will allow you to quickly adapt the parameters of your replica to the requirements of your shooter. You can create several profiles for one replica - with different settings or create accounts for several different replicas. Then all you have to do is select the option in the app and you're ready to play!
All the capabilities of HAL^2 and the Specna Link ™ app:
-
trigger sensitivity adjustment,
-
precocking for faster trigger press response,
-
selectable shooting modes: SINGLE, BINARY, SERIAL or AUTO and assign it to the selected selector position,
-
adjustment of batch length,
-
rate of fire setting,
-
liPo/LiIon battery over-discharge protection,
-
magazine mode,
-
continuously displayed battery charge level,
-
saving of settings for different game modes,
-
advanced telemetry data, which can be collected in one place and performance monitored with it,
-
the ability to track the status of the replica in real time.
The replica has been very well-fitted - in a way that could previously only be seen almost exclusively in manufacturers of the G&P or Classic Army class - and perfectly balanced. This ensures ideal manoeuvrability of the replica, while its weight is also almost imperceptible once the replica is placed against the shoulder.
The replica uses a quick-change spring system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica's power to the conditions expected on the battlefield without the need to have access to a workshop or a number of specialised tools - after removing the gearbox from the body of the replica, the very process of changing the spring takes literally a few seconds.
The replica has been fully adapted to work with LiPo and LiFe type batteries. Thanks to the base initial discharge velocity of ~410 FPS guaranteed by the pre-installed mainspring, the replica is perfect for medium range operations. An M90-type spring is also included, allowing the initial velocity to be reduced to ~310 FPS, thus making the replica perfectly suited for short-range or indoor operations.
The gearbox, reinforced at the height of the cylinder head, houses a steel spring guide that is part of the Enter & Convert™ system and steel gears mounted on 8mm ball bearings and washers. The system is secured by four anti-reverse pawls. It also uses a Type 2 cylinder and a steel cut-off lever. The replica is factory-installed with an accurate, rotating, polymer Hop-Up chamber, which allows for very precise and stable adjustment of the ball overtravel system.
- set of reinforced steel gears
- steel spring guide
- lightweight polymer piston
- sealed aluminium piston head
- metal cylinder head
- sealed metal nozzle
The replica is equipped with a 22mm dorsal RIS rail, a set of front RIS rails and an adjustable buttstock. Metal flip-up sights have been fitted on the top RIS rail, but they can be freely replaced by any optoelectronic sighting device. Thanks to the sliding buttstock finished with an anti-slip textured footplate, it is possible to adjust the length of the replica to the shooter's build and preferences. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.
To increase the realism of the game, the replica has also been equipped with a functioning breech release.
The replica also comes with a steel hi-cap magazine, which holds 300 rounds.
Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.
Package include:
- Instruction
- Hi-Cap Magazine
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
HAL2 does not support brushless DC motors (BLDC)
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Brown |
| Product length [cm] | 78.50 |
| Product weight [g] | 2580 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 410 |
| Fire mode | Full-auto Semi-auto |
