The Specna Arms RRA SA-E03 Kestrel™ ETU 1.14 J
Specna Arms presents the EDGE™ line with the Kestrel™
Trigger control system aids replica performance, and allows programming of functions easily with the trigger.
The Kestrel V2 Basic ETU by Eshooter is an advanced ETU system featuring ease of use, durability and functionality. The Kestrel V2 Basic is programmable with trigger pulls, works with both brush and brushless motors in High Speed and High Torque configurations and increases the reliability of the replica and protects internal parts in the event of overload due to motor damage or battery drain.
Functions of the Kestrel Basic system:
-Pre-cocking programmable in 5 stages with piston position learning function.
(function requires a few single shots after connecting the battery for calibration)
-Active Break. The replica performs a full cycle with each shot, so that no unnecessary overloads are created in the GB due to performing part of the cycle.
-Locked Rotor Protection, function protects the inside of the replica in case of damage to the motor
-Battery Drain Protection. Protection against battery discharge. The motor vibrates, the blue LED illuminates five times to indicate battery drain
-Low/ High Voltage Protection. The module detects the number of battery cells and adjusts operation to different cell counts and voltages from 6V to 17V.
The RRA SA-E03 EDGE™ replica is a model from Specna Arms, manufactured under license from Rock River Arms a firearms manufacturer. The replica uses durable parts and materials that prolong its life, as well as such solutions that facilitate diagnostics and allow power tuning. It is a universal airsoft gun, giving the possibility to adjust the firing speed and parameters to the game conditions.
The carbine is characterised by:.
- reinforced frame
- mainspring release function
-reinforced polymer piston with full steel jaw
-aluminium sealed nozzle
-aluminium, double-sealed cylinder head
-bearing spring guide
-set of steel gears
-8mm ball bearings
The airsoft rifle is equipped with the ESA™ quick-change spring system, which allows the mainspring to be replaced in just a few minutes.
Package include:
- 2 x mid-cap S-MAG magazine
- Deans adapter - small Tamyia
- Instruction
- Replica
- M90 additional spring
Package exclude:
- The set does not include the battery nor charger
Battery included NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state. | No |
| Bearings diameter [mm] | 8 |
| Blow Back Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting. | No |
| Colour | Black |
| Product length [cm] | 88 |
| Product weight [g] | 2400 |
| Power supply | Electric |
| Material | Metal Plastic |
| Muzzle velocity [FPS] It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second). 1 FPS = 0,3 m/s 1 J = 99 m/s 1 J = 326,7 FPS | 340 |
| Fire mode | Full-auto Adjusted burst Semi-auto |